#include <linux/phylink.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
-@@ -2611,128 +2612,11 @@ static int mt7531_rgmii_setup(struct mt7
+@@ -2615,128 +2616,11 @@ static int mt7531_rgmii_setup(struct mt7
return 0;
}
static int
mt7531_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
phy_interface_t interface)
-@@ -2755,11 +2639,11 @@ mt7531_mac_config(struct dsa_switch *ds,
+@@ -2759,11 +2643,11 @@ mt7531_mac_config(struct dsa_switch *ds,
phydev = dp->slave->phydev;
return mt7531_rgmii_setup(priv, port, interface, phydev);
case PHY_INTERFACE_MODE_SGMII:
default:
return -EINVAL;
}
-@@ -2784,11 +2668,11 @@ mt753x_phylink_mac_select_pcs(struct dsa
+@@ -2788,11 +2672,11 @@ mt753x_phylink_mac_select_pcs(struct dsa
switch (interface) {
case PHY_INTERFACE_MODE_TRGMII:
default:
return NULL;
}
-@@ -3029,86 +2913,6 @@ static void mt7530_pcs_get_state(struct
+@@ -3033,86 +2917,6 @@ static void mt7530_pcs_get_state(struct
state->pause |= MLO_PAUSE_TX;
}
static int mt753x_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
phy_interface_t interface,
const unsigned long *advertising,
-@@ -3128,18 +2932,57 @@ static const struct phylink_pcs_ops mt75
+@@ -3132,18 +2936,57 @@ static const struct phylink_pcs_ops mt75
.pcs_an_restart = mt7530_pcs_an_restart,
};
int i, ret;
/* Initialise the PCS devices */
-@@ -3147,8 +2990,6 @@ mt753x_setup(struct dsa_switch *ds)
+@@ -3151,8 +2994,6 @@ mt753x_setup(struct dsa_switch *ds)
priv->pcs[i].pcs.ops = priv->info->pcs_ops;
priv->pcs[i].priv = priv;
priv->pcs[i].port = i;
}
ret = priv->info->sw_setup(ds);
-@@ -3163,6 +3004,16 @@ mt753x_setup(struct dsa_switch *ds)
+@@ -3167,6 +3008,16 @@ mt753x_setup(struct dsa_switch *ds)
if (ret && priv->irq)
mt7530_free_irq_common(priv);
return ret;
}
-@@ -3254,7 +3105,7 @@ static const struct mt753x_info mt753x_t
+@@ -3258,7 +3109,7 @@ static const struct mt753x_info mt753x_t
},
[ID_MT7531] = {
.id = ID_MT7531,
.sw_setup = mt7531_setup,
.phy_read = mt7531_ind_phy_read,
.phy_write = mt7531_ind_phy_write,
-@@ -3362,7 +3213,7 @@ static void
+@@ -3366,7 +3217,7 @@ static void
mt7530_remove(struct mdio_device *mdiodev)
{
struct mt7530_priv *priv = dev_get_drvdata(&mdiodev->dev);
if (!priv)
return;
-@@ -3381,6 +3232,10 @@ mt7530_remove(struct mdio_device *mdiode
+@@ -3385,6 +3236,10 @@ mt7530_remove(struct mdio_device *mdiode
mt7530_free_irq(priv);
dsa_unregister_switch(priv->ds);
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
-@@ -369,47 +369,8 @@ enum mt7530_vlan_port_acc_frm {
+@@ -371,47 +371,8 @@ enum mt7530_vlan_port_acc_frm {
CCR_TX_OCT_CNT_BAD)
/* MT7531 SGMII register group */
/* Register for system reset */
#define MT7530_SYS_CTRL 0x7000
-@@ -708,13 +669,13 @@ struct mt7530_fdb {
+@@ -710,13 +671,13 @@ struct mt7530_fdb {
* @pm: The matrix used to show all connections with the port.
* @pvid: The VLAN specified is to be considered a PVID at ingress. Any
* untagged frames will be assigned to the related VLAN.