ipq4019: add support for ZTE MF287 Pro aka DreiNeo Pro

[openwrt/staging/neocturne.git] / target / linux / ipq40xx / base-files / etc / board.d / 02_network

diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network
index 28648c0db99e53321ca9b25f3cce2f10e458bbf3..77dc892d078874950d52f597a788eb6245fdd553 100644 (file)
--- a/target/linux/ipq40xx/base-files/etc/board.d/02_network
+++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network
@@ -24,6 +24,7 @@ ipq40xx_setup_interfaces()
        p2w,r619ac-64m|\
        p2w,r619ac-128m|\
        pakedge,wr-1|\
+       teltonika,rutx50|\
        zyxel,nbg6617)
                ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
                ;;
@@ -82,6 +83,7 @@ ipq40xx_setup_interfaces()
                ucidef_set_interface_lan "sw-eth1 sw-eth2"
                ;;
        aruba,ap-303h|\
+       buffalo,wtr-m2133hp|\
        ezviz,cs-w3-wd1200g-eup|\
        netgear,rbr50|\
        netgear,rbs50|\
@@ -97,9 +99,20 @@ ipq40xx_setup_interfaces()
        plasmacloud,pa2200)
                ucidef_set_interfaces_lan_wan "ethernet1" "ethernet2"
                ;;
+       qxwlan,e2600ac-c1)
+               ucidef_set_interfaces_lan_wan "sw-eth1" "sw-eth2"
+               ;;
+       qxwlan,e2600ac-c2)
+               ucidef_set_interfaces_lan_wan "sw-eth1 sw-eth2" "sw-eth3"
+               ;;
        zte,mf286d)
                ucidef_set_interfaces_lan_wan "lan2 lan3 lan4" "wan"
                ;;
+       zte,mf287plus|\
+       zte,mf287pro)
+               ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
+               ucidef_set_interface "wan" device "/dev/cdc-wdm0" protocol "qmi"
+               ;;
        *)
                echo "Unsupported hardware. Network interfaces not initialized"
                ;;