ipq40xx: convert AP-365 to DSA

[openwrt/staging/dedeckeh.git] / target / linux / ipq40xx / base-files / etc / board.d / 02_network

diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network
index b98c85decfb4c54a8b8b96ee46c13ac0b02c3308..7c9c2f0827829f146f6fa25f6d7a757808c0a357 100644 (file)
--- a/target/linux/ipq40xx/base-files/etc/board.d/02_network
+++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network
@@ -34,20 +34,27 @@ ipq40xx_setup_interfaces()
        edgecore,ecw5211|\
        glinet,gl-b2200|\
        google,wifi|\
+       linksys,whw03v2|\
        luma,wrtq-329acn|\
        mikrotik,cap-ac|\
        netgear,wac510|\
        sony,ncp-hg100-cellular|\
+       wallys,dr40x9|\
+       zte,mf18a|\
        zte,mf289f)
                ucidef_set_interfaces_lan_wan "lan" "wan"
                ;;
        aruba,ap-303|\
+       aruba,ap-365|\
        avm,fritzrepeater-1200|\
        dlink,dap-2610|\
+       extreme-networks,ws-ap3915i|\
        meraki,mr33|\
        meraki,mr74|\
        mikrotik,lhgg-60ad|\
-       mikrotik,sxtsq-5-ac)
+       mikrotik,sxtsq-5-ac|\
+       netgear,ex6100v2|\
+       netgear,ex6150v2)
                ucidef_set_interface_lan "lan"
                ;;
        avm,fritzbox-7530)
@@ -59,14 +66,20 @@ ipq40xx_setup_interfaces()
        compex,wpj428)
                ucidef_set_interface_lan "lan1 lan2"
                ;;
+       linksys,whw01)
+               ucidef_set_interface_lan "eth1 eth2"
+               ;;
        glinet,gl-a1300|\
        glinet,gl-b1300|\
        mobipromo,cm520-79f)
                ucidef_set_interfaces_lan_wan "lan1 lan2" "wan"
                ;;
-       mikrotik,wap-ac)
+       mikrotik,wap-ac|\
+       mikrotik,wap-ac-lte|\
+       mikrotik,wap-r-ac)
                ucidef_set_interface_lan "sw-eth1 sw-eth2"
                ;;
+       aruba,ap-303h|\
        netgear,rbr50|\
        netgear,rbs50|\
        netgear,srr60|\
@@ -77,6 +90,10 @@ ipq40xx_setup_interfaces()
        openmesh,a62)
                ucidef_set_interfaces_lan_wan "ethernet2" "ethernet1"
                ;;
+       plasmacloud,pa1200|\
+       plasmacloud,pa2200)
+               ucidef_set_interfaces_lan_wan "ethernet1" "ethernet2"
+               ;;
        zte,mf286d)
                ucidef_set_interfaces_lan_wan "lan2 lan3 lan4" "wan"
                ;;
@@ -86,6 +103,26 @@ ipq40xx_setup_interfaces()
        esac
 }
 
+ipq40xx_setup_dsl()
+{
+       local board="$1"
+       local annex="j"
+       local tone="b"
+       local xfer_mode=""
+
+       case "$board" in
+       avm,fritzbox-7530)
+               ;;
+       *)
+               return 0
+               ;;
+       esac
+
+       ucidef_add_atm_bridge "1" "32" "llc" "bridged" "dsl"
+       ucidef_add_vdsl_modem "$annex" "$tone" "$xfer_mode"
+       ucidef_set_interface_wan "dsl0" "pppoe"
+}
+
 ipq40xx_setup_macs()
 {
        local board="$1"
@@ -105,6 +142,10 @@ ipq40xx_setup_macs()
                lan_mac=$(mtd_get_mac_binary_ubi Factory 0x5006)
                label_mac=$wan_mac
                ;;
+       avm,fritzbox-7530)
+               local tffsdev=$(find_mtd_chardev "nand-tffs")
+               wan_mac=$(/usr/bin/fritz_tffs_nand -b -d $tffsdev -n macdsl)
+               ;;
        cilab,meshpoint-one)
                label_mac=$(mtd_get_mac_binary "ART" 0x1006)
                ;;
@@ -163,10 +204,6 @@ ipq40xx_setup_macs()
        pakedge,wr-1)
                wan_mac=$(macaddr_add $(get_mac_label) 1)
                ;;
-       openmesh,a42|\
-       openmesh,a62)
-               label_mac="$(mtd_get_mac_binary "0:ART" 0x0)"
-               ;;
        esac
 
        [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
@@ -177,6 +214,7 @@ ipq40xx_setup_macs()
 board_config_update
 board=$(board_name)
 ipq40xx_setup_interfaces $board
+ipq40xx_setup_dsl $board
 ipq40xx_setup_macs $board
 board_config_flush