ipq40xx: utilize nvmem-cells for openmesh,a42

[openwrt/staging/hauke.git] / target / linux / ipq40xx / base-files / etc / hotplug.d / firmware / 11-ath10k-caldata

diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index f1c424a28d225277bfa98b7dff22d1c937014b50..559aacea1ebef21eeb78112b6cc61c637fd4bd33 100644 (file)
--- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -13,7 +13,6 @@ case "$FIRMWARE" in
        meraki,mr74)
                caldata_extract_ubi "ART" 0x9000 0x844
                caldata_valid "4408" || caldata_extract "ART" 0x9000 0x844
-               ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 1)
                ;;
        esac
        ;;
@@ -78,7 +77,6 @@ case "$FIRMWARE" in
                /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
                ;;
        cellc,rtl30vw |\
-       openmesh,a42 |\
        openmesh,a62 |\
        plasmacloud,pa1200 |\
        plasmacloud,pa2200)
@@ -104,6 +102,10 @@ case "$FIRMWARE" in
                caldata_extract "ART" 0x1000 0x2f20
                ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 2)
                ;;
+       extreme-networks,ws-ap3915i)
+               caldata_extract "ART" 0x1000 0x2f20
+               ath10k_patch_mac $(mtd_get_mac_ascii CFG1 RADIOADDR0)
+               ;;
        linksys,ea8300 |\
        linksys,mr8300)
                caldata_extract "ART" 0x1000 0x2f20
@@ -113,11 +115,11 @@ case "$FIRMWARE" in
        meraki,mr74)
                caldata_extract_ubi "ART" 0x1000 0x2f20
                caldata_valid "202f" || caldata_extract "ART" 0x1000 0x2f20
-               ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 2)
                ;;
        mikrotik,cap-ac |\
        mikrotik,hap-ac2 |\
        mikrotik,hap-ac3 |\
+       mikrotik,hap-ac3-lte6-kit |\
        mikrotik,wap-ac)
                wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
                ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x0 0x2f20 ) || \
@@ -130,6 +132,17 @@ case "$FIRMWARE" in
                caldata_extract_mmc "0:ART" 0x1000 0x2f20
                ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0x0)
                ;;
+       pakedge,wr-1)
+               caldata_extract "0:ART" 0x1000 0x2f20
+               ath10k_patch_mac $(macaddr_add $(get_mac_label) 2)
+               ;;
+       teltonika,rutx10)
+               caldata_extract "0:ART" 0x1000 0x2f20
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:CONFIG" 0x0) 2)
+               ;;
+       sony,ncp-hg100-cellular)
+               caldata_extract_mmc "0:ART" 0x1000 0x2f20
+               ;;
        zyxel,nbg6617 |\
        zyxel,wre6606)
                caldata_extract "ART" 0x1000 0x2f20
@@ -160,7 +173,6 @@ case "$FIRMWARE" in
                /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
                ;;
        cellc,rtl30vw |\
-       openmesh,a42 |\
        openmesh,a62 |\
        plasmacloud,pa1200 |\
        plasmacloud,pa2200)
@@ -186,6 +198,10 @@ case "$FIRMWARE" in
                caldata_extract "ART" 0x5000 0x2f20
                ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 3)
                ;;
+       extreme-networks,ws-ap3915i)
+               caldata_extract "ART" 0x5000 0x2f20
+               ath10k_patch_mac $(mtd_get_mac_ascii CFG1 RADIOADDR1)
+               ;;
        linksys,ea8300 |\
        linksys,mr8300)
                caldata_extract "ART" 0x5000 0x2f20
@@ -195,11 +211,11 @@ case "$FIRMWARE" in
        meraki,mr74)
                caldata_extract_ubi "ART" 0x5000 0x2f20
                caldata_valid "202f" || caldata_extract "ART" 0x5000 0x2f20
-               ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 3)
                ;;
        mikrotik,cap-ac |\
        mikrotik,hap-ac2 |\
        mikrotik,hap-ac3 |\
+       mikrotik,hap-ac3-lte6-kit |\
        mikrotik,sxtsq-5-ac |\
        mikrotik,wap-ac)
                wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
@@ -213,6 +229,17 @@ case "$FIRMWARE" in
                caldata_extract_mmc "0:ART" 0x5000 0x2f20
                ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0xc)
                ;;
+       pakedge,wr-1)
+               caldata_extract "0:ART" 0x5000 0x2f20
+               ath10k_patch_mac $(macaddr_add $(get_mac_label) 4)
+               ;;
+       teltonika,rutx10)
+               caldata_extract "0:ART" 0x5000 0x2f20
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:CONFIG" 0x0) 3)
+               ;;
+       sony,ncp-hg100-cellular)
+               caldata_extract_mmc "0:ART" 0x5000 0x2f20
+               ;;
        zyxel,nbg6617 |\
        zyxel,wre6606)
                caldata_extract "ART" 0x5000 0x2f20
@@ -225,6 +252,7 @@ case "$FIRMWARE" in
        mikrotik,cap-ac |\
        mikrotik,hap-ac2 |\
        mikrotik,hap-ac3 |\
+       mikrotik,hap-ac3-lte6-kit |\
        mikrotik,wap-ac)
                wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
                ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x2f20 0x2f20 ) || \
@@ -237,6 +265,7 @@ case "$FIRMWARE" in
        mikrotik,cap-ac |\
        mikrotik,hap-ac2 |\
        mikrotik,hap-ac3 |\
+        mikrotik,hap-ac3-lte6-kit |\
        mikrotik,sxtsq-5-ac |\
        mikrotik,wap-ac)
                wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"