ipq40xx: utilize nvmem-cells for plasmacloud,pa2200

[openwrt/staging/hauke.git] / target / linux / ipq40xx / base-files / etc / hotplug.d / firmware / 11-ath10k-caldata

diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 64215746d55ff4c4847081e587e625126cded124..7498e1c71040e8dbb76f7742e6971da66f7c455c 100644 (file)
--- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -34,10 +34,6 @@ case "$FIRMWARE" in
                /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
                /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
                ;;
-       openmesh,a62 |\
-       plasmacloud,pa2200)
-               caldata_extract "0:ART" 0x9000 0x2f20
-               ;;
        linksys,ea8300 |\
        linksys,mr8300)
                caldata_extract "ART" 0x9000 0x2f20
@@ -76,11 +72,7 @@ case "$FIRMWARE" in
                /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
                /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
                ;;
-       cellc,rtl30vw |\
-       openmesh,a42 |\
-       openmesh,a62 |\
-       plasmacloud,pa1200 |\
-       plasmacloud,pa2200)
+       cellc,rtl30vw)
                caldata_extract "0:ART" 0x1000 0x2f20
                ;;
        devolo,magic-2-wifi-next)
@@ -120,6 +112,7 @@ case "$FIRMWARE" in
        mikrotik,cap-ac |\
        mikrotik,hap-ac2 |\
        mikrotik,hap-ac3 |\
+       mikrotik,hap-ac3-lte6-kit |\
        mikrotik,wap-ac)
                wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
                ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x0 0x2f20 ) || \
@@ -172,11 +165,7 @@ case "$FIRMWARE" in
                /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
                /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
                ;;
-       cellc,rtl30vw |\
-       openmesh,a42 |\
-       openmesh,a62 |\
-       plasmacloud,pa1200 |\
-       plasmacloud,pa2200)
+       cellc,rtl30vw)
                caldata_extract "0:ART" 0x5000 0x2f20
                ;;
        devolo,magic-2-wifi-next)
@@ -216,6 +205,7 @@ case "$FIRMWARE" in
        mikrotik,cap-ac |\
        mikrotik,hap-ac2 |\
        mikrotik,hap-ac3 |\
+       mikrotik,hap-ac3-lte6-kit |\
        mikrotik,sxtsq-5-ac |\
        mikrotik,wap-ac)
                wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
@@ -252,6 +242,7 @@ case "$FIRMWARE" in
        mikrotik,cap-ac |\
        mikrotik,hap-ac2 |\
        mikrotik,hap-ac3 |\
+       mikrotik,hap-ac3-lte6-kit |\
        mikrotik,wap-ac)
                wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
                ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x2f20 0x2f20 ) || \
@@ -264,6 +255,7 @@ case "$FIRMWARE" in
        mikrotik,cap-ac |\
        mikrotik,hap-ac2 |\
        mikrotik,hap-ac3 |\
+        mikrotik,hap-ac3-lte6-kit |\
        mikrotik,sxtsq-5-ac |\
        mikrotik,wap-ac)
                wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"