dd if=$@.new bs=64 count=1 >> $(IMAGE_KERNEL)
endef
+define Build/append-rutx-metadata
+ echo \
+ '{ \
+ "device_code": [".*"], \
+ "hwver": [".*"], \
+ "batch": [".*"], \
+ "serial": [".*"], \
+ "supported_devices":["teltonika,rutx"] \
+ }' | fwtool -I - $@
+endef
+
+define Build/copy-file
+ cat "$(1)" > "$@"
+endef
+
define Build/mkmylofw_32m
$(eval device_id=$(word 1,$(1)))
$(eval revision=$(word 2,$(1)))
@mv $@.new $@
endef
+define Build/qsdk-ipq-app-gpt
+ cp $@ $@.tmp 2>/dev/null || true
+ ptgen -g -o $@.tmp -a 1 -l 1024 \
+ -t 0x2e -N 0:HLOS -r -p 32M \
+ -t 0x83 -N rootfs -r -p 128M \
+ -N rootfs_data -p 512M
+ cat $@.tmp >> $@
+ rm $@.tmp
+endef
+
define Build/SenaoFW
-$(STAGING_DIR_HOST)/bin/mksenaofw \
-n $(BOARD_NAME) -r $(VENDOR_ID) -p $(1) \
DEVICE_MODEL := Habanero DVK
IMAGE_SIZE := 30976k
SOC := qcom-ipq4019
- DEVICE_PACKAGES := ipq-wifi-8dev_habanero-dvk
IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | append-rootfs | pad-rootfs | check-size | append-metadata
endef
TARGET_DEVICES += 8dev_habanero-dvk
$(call Device/FitImageLzma)
DEVICE_VENDOR := Aruba
SOC := qcom-ipq4029
- DEVICE_PACKAGES := ipq-wifi-aruba_ap-303
endef
define Device/aruba_ap-303
endef
TARGET_DEVICES += asus_map-ac2200
+# WARNING: this is an initramfs image that gets you half of the way there
+# you need to delete the jffs2 ubi volume and sysupgrade to the final image
+# to get a "trx" you can flash via web UI for ac42u/ac58u:
+# - change call Device/FitImageLzma to Device/FitImage
+# - add the following below UIMAGE_NAME
+# UIMAGE_MAGIC := 0x27051956
+# IMAGES += factory.trx
+# IMAGE/factory.trx := copy-file $(KDIR)/tmp/$$(KERNEL_INITRAMFS_IMAGE) | uImage none
+define Device/asus_rt-ac42u
+ $(call Device/FitImageLzma)
+ DEVICE_VENDOR := ASUS
+ DEVICE_MODEL := RT-AC42U
+ DEVICE_ALT0_VENDOR := ASUS
+ DEVICE_ALT0_MODEL := RT-ACRH17
+ DEVICE_ALT1_VENDOR := ASUS
+ DEVICE_ALT1_MODEL := RT-AC2200
+ SOC := qcom-ipq4019
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ IMAGE_SIZE := 20439364
+ FILESYSTEMS := squashfs
+# RT-AC82U is nowhere to be found online
+# Rather, this device is a/k/a RT-AC42U
+# But we'll go with what the vendor firmware has...
+ UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC82U')
+ DEVICE_PACKAGES := ath10k-firmware-qca9984-ct kmod-usb-ledtrig-usbport
+endef
+TARGET_DEVICES += asus_rt-ac42u
+
define Device/asus_rt-ac58u
$(call Device/FitImageLzma)
DEVICE_VENDOR := ASUS
DEVICE_MODEL := RT-AC58U
+ DEVICE_ALT0_VENDOR := ASUS
+ DEVICE_ALT0_MODEL := RT-ACRH13
SOC := qcom-ipq4018
BLOCKSIZE := 128k
PAGESIZE := 2048
- DTB_SIZE := 65536
- IMAGE_SIZE := 20439364
+ IMAGE_SIZE := 20439300
FILESYSTEMS := squashfs
# Someone - in their infinite wisdom - decided to put the firmware
# version in front of the image name \03\00\00\04 => Version 3.0.0.4
# to add a version... or we are very careful not to add '\0' into that
# string and call it a day.... Yeah, we do the latter!
UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC58U')
+ ARTIFACTS := install.trx
+ ARTIFACT/install.trx := copy-file $(KDIR)/tmp/$$(KERNEL_INITRAMFS_IMAGE) \
+ | pad-to $$$$(IMAGE_SIZE) | uImage none
DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
kmod-usb-ledtrig-usbport
endef
$(call Device/FitImageLzma)
DEVICE_VENDOR := AVM
DEVICE_MODEL := FRITZ!Box 7530
+ DEVICE_ALT0_VENDOR := AVM
+ DEVICE_ALT0_MODEL := FRITZ!Box 7520
SOC := qcom-ipq4019
DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand
endef
DEVICE_VENDOR := AVM
DEVICE_MODEL := FRITZ!Repeater 1200
SOC := qcom-ipq4019
- DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand ipq-wifi-avm_fritzrepeater-1200
+ DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand
endef
TARGET_DEVICES += avm_fritzrepeater-1200
DEVICE_VENDOR := Buffalo
DEVICE_MODEL := WTR-M2133HP
SOC := qcom-ipq4019
- DEVICE_PACKAGES := ath10k-firmware-qca9984-ct ipq-wifi-buffalo_wtr-m2133hp
+ DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
BLOCKSIZE := 128k
PAGESIZE := 2048
endef
TARGET_DEVICES += buffalo_wtr-m2133hp
define Device/cellc_rtl30vw
- KERNEL_SUFFIX := -fit-uImage.itb
+ KERNEL_SUFFIX := -fit-zImage.itb
KERNEL_INITRAMFS = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
- KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb | uImage lzma | pad-to 2048
- KERNEL_NAME := Image
+ KERNEL = kernel-bin | fit none $$(DTS_DIR)/$$(DEVICE_DTS).dtb | uImage lzma | pad-to 2048
+ KERNEL_NAME := zImage
KERNEL_IN_UBI :=
IMAGES := nand-factory.bin nand-sysupgrade.bin
IMAGE/nand-factory.bin := append-rootfshdr | append-ubi | qsdk-ipq-factory-nand-askey
IMAGE_SIZE := 57344k
BLOCKSIZE := 128k
PAGESIZE := 2048
- DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi ipq-wifi-cellc_rtl30vw
+ DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
endef
TARGET_DEVICES += cellc_rtl30vw
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
IMAGE/cpximg-6a04.bin := append-kernel | append-rootfs | pad-rootfs | mkmylofw_32m 0x8A2 3
DEVICE_PACKAGES := kmod-gpio-beeper
+ DEFAULT := n
endef
TARGET_DEVICES += compex_wpj428
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
DEVICE_PACKAGES := ipq-wifi-devolo_magic-2-wifi-next
+ DEFAULT := n
endef
TARGET_DEVICES += devolo_magic-2-wifi-next
# append-rootfs must start on an erase block boundary.
IMAGE/factory.bin := append-kernel | pad-offset 6144k 160 | append-rootfs | wrgg-image | check-size
IMAGE/sysupgrade.bin := append-kernel | wrgg-image | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size | append-metadata
- DEVICE_PACKAGES := ipq-wifi-dlink_dap2610
endef
TARGET_DEVICES += dlink_dap-2610
SOC := qcom-ipq4019
BLOCKSIZE := 128k
PAGESIZE := 2048
- DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-engenius_eap2200 -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
+ DEVICE_PACKAGES := ath10k-firmware-qca9888-ct -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
endef
TARGET_DEVICES += engenius_eap2200
IMAGES += factory.bin
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
- DEVICE_PACKAGES := ipq-wifi-engenius_emd1
endef
TARGET_DEVICES += engenius_emd1
IMAGES += factory.bin
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
- DEVICE_PACKAGES := ipq-wifi-engenius_emr3500
+ DEFAULT := n
endef
TARGET_DEVICES += engenius_emr3500
DEVICE_VENDOR := EZVIZ
DEVICE_MODEL := CS-W3-WD1200G
DEVICE_VARIANT := EUP
- DEVICE_DTS_CONFIG := config@4
IMAGE_SIZE := 14848k
+ KERNEL_SIZE = 6m
SOC := qcom-ipq4018
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
append-metadata
- DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
- ipq-wifi-ezviz_cs-w3-wd1200g-eup
+ DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
+ DEVICE_COMPAT_VERSION := 2.0
+ DEVICE_COMPAT_MESSAGE := uboot's bootcmd has to be updated (see wiki). \
+ Upgrade via sysupgrade mechanism is not possible.
endef
TARGET_DEVICES += ezviz_cs-w3-wd1200g-eup
TARGET_DEVICES += glinet_gl-ap1300
define Device/glinet_gl-b1300
- $(call Device/FitImage)
+ $(call Device/FitzImage)
DEVICE_VENDOR := GL.iNet
DEVICE_MODEL := GL-B1300
BOARD_NAME := gl-b1300
endef
TARGET_DEVICES += glinet_gl-b1300
+define Device/glinet_gl-b2200
+ $(call Device/FitzImage)
+ DEVICE_VENDOR := GL.iNet
+ DEVICE_MODEL := GL-B2200
+ SOC := qcom-ipq4019
+ DEVICE_DTS_CONFIG := config@ap.dk04.1-c3
+ KERNEL_INITRAMFS_SUFFIX := -recovery.itb
+ IMAGES := emmc.img.gz sysupgrade.bin
+ IMAGE/emmc.img.gz := qsdk-ipq-app-gpt |\
+ pad-to 1024k | append-kernel |\
+ pad-to 33792k | append-rootfs |\
+ append-metadata | gzip
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+ DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-glinet_gl-b2200 \
+ kmod-fs-ext4 kmod-mmc kmod-spi-dev mkf2fs e2fsprogs kmod-fs-f2fs
+endef
+TARGET_DEVICES += glinet_gl-b2200
+
define Device/glinet_gl-s1300
- $(call Device/FitImage)
+ $(call Device/FitzImage)
DEVICE_VENDOR := GL.iNet
DEVICE_MODEL := GL-S1300
SOC := qcom-ipq4029
UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=MR8300
- DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-linksys_mr8300-v0 kmod-usb-ledtrig-usbport
+ DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += linksys_mr8300
+define Device/linksys_whw01-v1
+ $(call Device/FitzImage)
+ DEVICE_VENDOR := Linksys
+ DEVICE_MODEL := WHW01
+ DEVICE_VARIANT := v1
+ KERNEL_SIZE := 6144k
+ IMAGE_SIZE := 28704512 # 28032k minus linksys signature (256-bytes).
+ SOC := qcom-ipq4018
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF
+ IMAGES += factory.bin
+ IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
+ append-ubi | linksys-image type=WHW01 | pad-to $$$$(PAGESIZE) | \
+ check-size
+ DEVICE_PACKAGES := uboot-envtools kmod-leds-pca963x
+endef
+TARGET_DEVICES += linksys_whw01-v1
+
define Device/luma_wrtq-329acn
$(call Device/FitImage)
DEVICE_VENDOR := Luma Home
DEVICE_MODEL := WRTQ-329ACN
SOC := qcom-ipq4018
- DEVICE_PACKAGES := ipq-wifi-luma_wrtq-329acn kmod-ath3k kmod-eeprom-at24 kmod-i2c-gpio
+ DEVICE_PACKAGES := kmod-ath3k kmod-eeprom-at24 kmod-i2c-gpio
IMAGE_SIZE := 76632k
BLOCKSIZE := 128k
PAGESIZE := 2048
SOC := qcom-ipq4019
BLOCKSIZE := 128k
PAGESIZE := 2048
- DEVICE_PACKAGES := ipq-wifi-mobipromo_cm520-79f kmod-usb-ledtrig-usbport
+ DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += mobipromo_cm520-79f
endef
TARGET_DEVICES += netgear_ex6150v2
+define Device/netgear_orbi
+ $(call Device/DniImage)
+ SOC := qcom-ipq4019
+ DEVICE_VENDOR := NETGEAR
+ IMAGE/factory.img := append-kernel | pad-offset 128k 64 | \
+ append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | \
+ append-rootfs | pad-rootfs | netgear-dni
+ IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to 64k | \
+ sysupgrade-tar rootfs=$$$$@ | append-metadata
+ DEVICE_PACKAGES := ath10k-firmware-qca9984-ct e2fsprogs kmod-fs-ext4 losetup
+endef
+
+define Device/netgear_rbx50
+ $(call Device/netgear_orbi)
+ NETGEAR_HW_ID := 29765352+0+4000+512+2x2+2x2+4x4
+ KERNEL_SIZE := 3932160
+ ROOTFS_SIZE := 32243712
+ IMAGE_SIZE := 36175872
+endef
+
+define Device/netgear_rbr50
+ $(call Device/netgear_rbx50)
+ DEVICE_MODEL := RBR50
+ DEVICE_VARIANT := v1
+ NETGEAR_BOARD_ID := RBR50
+endef
+TARGET_DEVICES += netgear_rbr50
+
+define Device/netgear_rbs50
+ $(call Device/netgear_rbx50)
+ DEVICE_MODEL := RBS50
+ DEVICE_VARIANT := v1
+ NETGEAR_BOARD_ID := RBS50
+endef
+TARGET_DEVICES += netgear_rbs50
+
+define Device/netgear_srx60
+ $(call Device/netgear_orbi)
+ NETGEAR_HW_ID := 29765352+0+4096+512+2x2+2x2+4x4
+ KERNEL_SIZE := 3932160
+ ROOTFS_SIZE := 32243712
+ IMAGE_SIZE := 36175872
+endef
+
+define Device/netgear_srr60
+ $(call Device/netgear_srx60)
+ DEVICE_MODEL := SRR60
+ NETGEAR_BOARD_ID := SRR60
+endef
+TARGET_DEVICES += netgear_srr60
+
+define Device/netgear_srs60
+ $(call Device/netgear_srx60)
+ DEVICE_MODEL := SRS60
+ NETGEAR_BOARD_ID := SRS60
+endef
+TARGET_DEVICES += netgear_srs60
+
define Device/netgear_wac510
$(call Device/FitImage)
$(call Device/UbiFit)
endef
TARGET_DEVICES += openmesh_a62
+define Device/p2w_r619ac
+ $(call Device/FitzImage)
+ $(call Device/UbiFit)
+ DEVICE_VENDOR := P&W
+ DEVICE_MODEL := R619AC
+ SOC := qcom-ipq4019
+ DEVICE_DTS_CONFIG := config@10
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ DEVICE_PACKAGES := ipq-wifi-p2w_r619ac
+endef
+
+define Device/p2w_r619ac-64m
+ $(call Device/p2w_r619ac)
+ DEVICE_VARIANT := 64M NAND
+ IMAGES += nand-factory.bin
+ IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
+endef
+TARGET_DEVICES += p2w_r619ac-64m
+
+define Device/p2w_r619ac-128m
+ $(call Device/p2w_r619ac)
+ DEVICE_VARIANT := 128M NAND
+endef
+TARGET_DEVICES += p2w_r619ac-128m
+
define Device/plasmacloud_pa1200
$(call Device/FitImageLzma)
DEVICE_VENDOR := Plasma Cloud
IMAGES += factory.bin
IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA1200
IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
- DEVICE_PACKAGES := ipq-wifi-plasmacloud_pa1200
endef
TARGET_DEVICES += plasmacloud_pa1200
IMAGES += factory.bin
IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA2200
IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
- DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-plasmacloud-pa2200
+ DEVICE_PACKAGES := ath10k-firmware-qca9888-ct
endef
TARGET_DEVICES += plasmacloud_pa2200
IMAGE_SIZE := 26624k
$(call Device/FitImage)
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata
+ DEFAULT := n
endef
TARGET_DEVICES += qcom_ap-dk01.1-c1
BLOCKSIZE := 128k
PAGESIZE := 2048
BOARD_NAME := ap-dk04.1-c1
+ DEFAULT := n
endef
TARGET_DEVICES += qcom_ap-dk04.1-c1
KERNEL_SIZE := 4096k
IMAGE_SIZE := 31232k
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
- DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac
+ DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac-c1
+ DEFAULT := n
endef
TARGET_DEVICES += qxwlan_e2600ac-c1
KERNEL_INSTALL := 1
BLOCKSIZE := 128k
PAGESIZE := 2048
- DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac
+ DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac-c2
endef
TARGET_DEVICES += qxwlan_e2600ac-c2
+define Device/teltonika_rutx10
+ $(call Device/FitImage)
+ $(call Device/UbiFit)
+ DEVICE_VENDOR := Teltonika
+ DEVICE_MODEL := RUTX10
+ SOC := qcom-ipq4018
+ DEVICE_DTS_CONFIG := config@5
+ KERNEL_INSTALL := 1
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ FILESYSTEMS := squashfs
+ IMAGE/nand-factory.ubi := append-ubi | qsdk-ipq-factory-nand | append-rutx-metadata
+ DEVICE_PACKAGES := ipq-wifi-teltonika_rutx kmod-bluetooth
+endef
+TARGET_DEVICES += teltonika_rutx10
+
+define Device/tel_x1pro
+ $(call Device/FitImage)
+ DEVICE_VENDOR := Telco
+ DEVICE_MODEL := X1 Pro
+ SOC := qcom-ipq4019
+ KERNEL_SIZE := 4096k
+ IMAGE_SIZE := 31232k
+ IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+ DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
+ DEFAULT := n
+endef
+TARGET_DEVICES += tel_x1pro
+
define Device/unielec_u4019-32m
$(call Device/FitImage)
DEVICE_VENDOR := Unielec
KERNEL_SIZE := 4096k
IMAGE_SIZE := 31232k
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+ DEFAULT := n
endef
TARGET_DEVICES += unielec_u4019-32m
+define Device/zte_mf286d
+ $(call Device/FitzImage)
+ DEVICE_VENDOR := ZTE
+ DEVICE_MODEL := MF286D
+ SOC := qcom-ipq4019
+ DEVICE_DTS_CONFIG := config@ap.dk04.1-c1
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ KERNEL_IN_UBI := 1
+ DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
+endef
+TARGET_DEVICES += zte_mf286d
+
define Device/zyxel_nbg6617
$(call Device/FitImageLzma)
DEVICE_VENDOR := ZyXEL