ipq806x: add support for Ubiquiti UniFi AC HD

[openwrt/staging/zorun.git] / target / linux / ipq806x / base-files / etc / board.d / 02_network

diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network b/target/linux/ipq806x/base-files/etc/board.d/02_network
index 65946d7ac50dc20d777993e9d342ae7851073f76..ddef4b7ac6c94718c828c2ed1d21336ee5c72885 100755 (executable)
--- a/target/linux/ipq806x/base-files/etc/board.d/02_network
+++ b/target/linux/ipq806x/base-files/etc/board.d/02_network
@@ -12,6 +12,11 @@ board_config_update
 board=$(board_name)
 
 case "$board" in
+asrock,g10 |\
+nec,wg2600hp)
+       ucidef_add_switch "switch0" \
+               "2:lan" "3:lan" "4:lan" "5:lan" "6@eth1" "1:wan" "0@eth0"
+       ;;
 buffalo,wxr-2533dhp |\
 compex,wpq864 |\
 netgear,d7800 |\
@@ -22,10 +27,10 @@ tplink,vr2600v)
        ucidef_add_switch "switch0" \
                "1:lan" "2:lan" "3:lan" "4:lan" "6@eth1" "5:wan" "0@eth0"
        ;;
-qcom,ipq8064-ap161)
-       ucidef_set_interface_lan "eth1 eth2"
-       ucidef_add_switch "switch0" \
-               "0:lan" "1:lan" "2:lan" "3u@eth1" "6:wan" "4u@eth0"
+edgecore,ecw5410)
+       ucidef_set_interfaces_lan_wan "eth1" "eth0"
+       ucidef_set_interface_macaddr "lan" "$(mtd_get_mac_binary "0:ART" 0x6)"
+       ucidef_set_interface_macaddr "wan" "$(mtd_get_mac_binary "0:ART" 0x0)"
        ;;
 linksys,ea7500-v1)
        hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
@@ -37,24 +42,33 @@ linksys,ea7500-v1)
 linksys,ea8500)
        hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
        ucidef_add_switch "switch0" \
-               "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
+               "1:lan" "2:lan" "3:lan" "4:lan" "6@eth1" "5:wan" "0@eth0"
        ucidef_set_interface_macaddr "lan" "$hw_mac_addr"
        ucidef_set_interface_macaddr "wan" "$hw_mac_addr"
        ;;
-nec,wg2600hp)
+nec,wg2600hp3)
        ucidef_add_switch "switch0" \
-               "2:lan" "3:lan" "4:lan" "5:lan" "6@eth1" "1:wan" "0@eth0"
+               "2:lan" "3:lan" "4:lan" "5:lan" "0@eth1" "1:wan" "6@eth0"
        ;;
 netgear,r7800 |\
+tplink,ad7200 |\
 tplink,c2600)
        ucidef_add_switch "switch0" \
                "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "6@eth1" "5:wan" "0@eth0"
        ;;
+qcom,ipq8064-ap161)
+       ucidef_set_interface_lan "eth1 eth2"
+       ucidef_add_switch "switch0" \
+               "0:lan" "1:lan" "2:lan" "3u@eth1" "6:wan" "4u@eth0"
+       ;;
 qcom,ipq8064-db149)
        ucidef_set_interface_lan "eth1 eth2 eth3"
        ucidef_add_switch "switch0" \
                "1:lan" "2:lan" "3:lan" "4:lan" "6u@eth1" "5:wan" "0u@eth0"
        ;;
+ubnt,unifi-ac-hd)
+       ucidef_set_interface_lan "eth0 eth1"
+       ;;
 zyxel,nbg6817)
        hw_mac_addr=$(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
        ucidef_add_switch "switch0" \