ipq806x: update Netgear R7800 device tree

[openwrt/staging/blogic.git] / target / linux / ipq806x / files / arch / arm / boot / dts / qcom-ipq8065-r7800.dts

diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-r7800.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-r7800.dts
index 52ca92a47f020a5ce2a00ca40a43b545b40d0293..d4ccab47fcee6a39957dead9561fd52ef00ee33f 100644 (file)
--- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-r7800.dts
+++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-r7800.dts
@@ -33,25 +33,13 @@
 
        soc {
                pinmux@800000 {
-                       i2c4_pins: i2c4_pinmux {
-                               pins = "gpio12", "gpio13";
-                               function = "gsbi4";
-                               bias-disable;
-                       };
-
-                       pcie0_pins: pcie0_pinmux {
-                               mux {
-                                       pins = "gpio3";
-                                       function = "pcie1_rst";
-                                       drive-strength = <12>;
-                                       bias-disable;
-                               };
-                       };
+                       pinctrl-0 = <&mdio0_pins &rgmii2_pins>;
+                       pinctrl-names = "default";
 
-                       pcie1_pins: pcie1_pinmux {
+                       i2c4_pins: i2c4_pinmux {
                                mux {
-                                       pins = "gpio48";
-                                       function = "pcie2_rst";
+                                       pins = "gpio12", "gpio13";
+                                       function = "gsbi4";
                                        drive-strength = <12>;
                                        bias-disable;
                                };
@@ -87,6 +75,11 @@
                                        drive-strength = <8>;
                                        bias-disable;
                                };
+
+                               clk {
+                                       pins = "gpio1";
+                                       input-disable;
+                               };
                        };
 
                        rgmii2_pins: rgmii2_pins {
@@ -97,6 +90,25 @@
                                        drive-strength = <8>;
                                        bias-disable;
                                };
+
+                               tx {
+                                       pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32" ;
+                                       input-disable;
+                               };
+                       };
+
+                       spi_pins: spi_pins {
+                               mux {
+                                       pins = "gpio18", "gpio19", "gpio21";
+                                       function = "gsbi5";
+                                       drive-strength = <10>;
+                                       bias-none;
+                               };
+
+                               cs {
+                                       pins = "gpio20";
+                                       drive-strength = <12>;
+                               };
                        };
                };
 
@@ -114,6 +126,30 @@
                         */
                };
 
+               gsbi5: gsbi@1a200000 {
+                       qcom,mode = <GSBI_PROT_SPI>;
+                       status = "ok";
+
+                       spi4: spi@1a280000 {
+                               status = "ok";
+                               spi-max-frequency = <50000000>;
+                               pinctrl-0 = <&spi_pins>;
+                               pinctrl-names = "default";
+
+                               cs-gpios = <&qcom_pinmux 20 0>;
+
+                               flash: m25p80@0 {
+                                       compatible = "s25fl512s";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+                                       spi-max-frequency = <51200000>;
+                                       reg = <0>;
+
+                                       linux,part-probe = "qcom-smem";
+                               };
+                       };
+               };
+
                sata-phy@1b400000 {
                        status = "ok";
                };
@@ -236,8 +272,6 @@
                        #address-cells = <1>;
                        #size-cells = <0>;
                        gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
-                       pinctrl-0 = <&mdio0_pins>;
-                       pinctrl-names = "default";
 
                        phy0: ethernet-phy@0 {
                                device_type = "ethernet-phy";
@@ -246,16 +280,34 @@
                                        0x00004 0x7600000   /* PAD0_MODE */
                                        0x00008 0x1000000   /* PAD5_MODE */
                                        0x0000c 0x80        /* PAD6_MODE */
-                                       0x000e4 0x6a545     /* MAC_POWER_SEL */
+                                       0x000e4 0xaa545     /* MAC_POWER_SEL */
                                        0x000e0 0xc74164de  /* SGMII_CTRL */
                                        0x0007c 0x4e        /* PORT0_STATUS */
                                        0x00094 0x4e        /* PORT6_STATUS */
+                                       0x00970 0x1e864443  /* QM_PORT0_CTRL0 */
+                                       0x00974 0x000001c6  /* QM_PORT0_CTRL1 */
+                                       0x00978 0x19008643  /* QM_PORT1_CTRL0 */
+                                       0x0097c 0x000001c6  /* QM_PORT1_CTRL1 */
+                                       0x00980 0x19008643  /* QM_PORT2_CTRL0 */
+                                       0x00984 0x000001c6  /* QM_PORT2_CTRL1 */
+                                       0x00988 0x19008643  /* QM_PORT3_CTRL0 */
+                                       0x0098c 0x000001c6  /* QM_PORT3_CTRL1 */
+                                       0x00990 0x19008643  /* QM_PORT4_CTRL0 */
+                                       0x00994 0x000001c6  /* QM_PORT4_CTRL1 */
+                                       0x00998 0x1e864443  /* QM_PORT5_CTRL0 */
+                                       0x0099c 0x000001c6  /* QM_PORT5_CTRL1 */
+                                       0x009a0 0x1e864443  /* QM_PORT6_CTRL0 */
+                                       0x009a4 0x000001c6  /* QM_PORT6_CTRL1 */
                                        >;
                        };
 
                        phy4: ethernet-phy@4 {
                                device_type = "ethernet-phy";
                                reg = <4>;
+                               qca,ar8327-initvals = <
+                                       0x000e4 0x6a545     /* MAC_POWER_SEL */
+                                       0x0000c 0x80        /* PAD6_MODE */
+                                       >;
                        };
                };
 
@@ -263,9 +315,13 @@
                        status = "ok";
                        phy-mode = "rgmii";
                        qcom,id = <1>;
-
-                       pinctrl-0 = <&rgmii2_pins>;
-                       pinctrl-names = "default";
+                       qcom,phy_mdio_addr = <4>;
+                       qcom,poll_required = <0>;
+                       qcom,rgmii_delay = <1>;
+                       qcom,phy_mii_type = <0>;
+                       qcom,emulation = <0>;
+                       qcom,irq = <255>;
+                       mdiobus = <&mdio0>;
 
                        mtd-mac-address = <&art 6>;
 
@@ -279,6 +335,13 @@
                        status = "ok";
                        phy-mode = "sgmii";
                        qcom,id = <2>;
+                       qcom,phy_mdio_addr = <0>;       /* none */
+                       qcom,poll_required = <0>;       /* no polling */
+                       qcom,rgmii_delay = <0>;
+                       qcom,phy_mii_type = <1>;
+                       qcom,emulation = <0>;
+                       qcom,irq = <258>;
+                       mdiobus = <&mdio0>;
 
                        mtd-mac-address = <&art 0>;
 
@@ -287,6 +350,11 @@
                                full-duplex;
                        };
                };
+
+               rpm@108000 {
+                       pinctrl-0 = <&i2c4_pins>;
+                       pinctrl-names = "default";
+               };
        };
 
        gpio-keys {