treewide: remove execute bit and shebang from board.d files

[openwrt/staging/jow.git] / target / linux / kirkwood / base-files / etc / board.d / 02_network

diff --git a/target/linux/kirkwood/base-files/etc/board.d/02_network b/target/linux/kirkwood/base-files/etc/board.d/02_network
old mode 100755 (executable)
new mode 100644 (file)
index 549d232..0578691
--- a/target/linux/kirkwood/base-files/etc/board.d/02_network
+++ b/target/linux/kirkwood/base-files/etc/board.d/02_network
@@ -1,4 +1,3 @@
-#!/bin/sh
 #
 # Copyright (C) 2012-2015 OpenWrt.org
 #
@@ -11,26 +10,35 @@ board_config_update
 board=$(board_name)
 
 case "$board" in
-"dockstar"|\
-"goflexhome"|\
-"goflexnet"|\
-"ib62x0"|\
-"iconnect"|\
-"pogo_e02")
+"checkpoint,l-50")
+       ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 lan5 lan6 lan7 lan8 dmz" "eth0"
+       ;;
+"cisco,on100")
+       ucidef_set_interface_lan "eth0 eth1"
+       ;;
+"cloudengines,pogoe02"|\
+"cloudengines,pogoplugv4"|\
+"iom,iconnect-1.1"|\
+"iom,ix2-200"|\
+"raidsonic,ib-nas62x0"|\
+"seagate,blackarmor-nas220"|\
+"seagate,dockstar"|\
+"seagate,goflexhome"|\
+"seagate,goflexnet"|\
+"zyxel,nsa310s")
        ucidef_set_interface_lan "eth0" "dhcp"
        ;;
-"linksys-audi"|\
-"linksys-viper")
-       ucidef_add_switch "switch0" \
-               "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0" "6@eth1"
+"linksys,e4200-v2"|\
+"linksys,ea3500"|\
+"linksys,ea4500")
+       ucidef_set_interfaces_lan_wan "ethernet1 ethernet2 ethernet3 ethernet4" "internet"
+       ucidef_set_interface_macaddr "wan" $( mtd_get_mac_ascii u_env eth1addr )
        ;;
-"nsa310b"|"nsa325")
+"zyxel,nsa310b"|\
+"zyxel,nsa325")
        ucidef_set_interface_lan "eth0" "dhcp"
        ucidef_set_interface_macaddr "lan" $( mtd_get_mac_ascii uboot_env ethaddr )
        ;;
-"on100")
-       ucidef_set_interface_lan "eth0 eth1"
-       ;;
 *)
        ucidef_set_interface_lan "eth0"
        ;;