/dts-v1/;
-/include/ "danube.dtsi"
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
/ {
model = "ARV7518PW - Astoria Networks";
chosen {
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+ };
- leds {
- boot = &power_green;
- failsafe = &power_red;
- running = &power_green;
+ aliases {
+ led-boot = &power_green;
+ led-failsafe = &power_red;
+ led-running = &power_green;
- dsl = &dsl;
- internet = &online_green;
- usb = &usb;
- wifi = &wifi;
- };
+ led-dsl = &dsl;
+ led-internet = &online_green;
+ led-usb = &usb;
+ led-wifi = &wifi;
};
memory@0 {
#address-cells = <1>;
#size-cells = <1>;
- partition@0 {
- label = "uboot";
- reg = <0x00000 0x10000>;
- read-only;
- };
-
- partition@10000 {
- label = "uboot_env";
- reg = <0x10000 0x10000>;
- };
-
- partition@20000 {
- label = "firmware";
- reg = <0x20000 0x7d0000>;
- };
-
- partition@400000 {
- label = "boardconfig";
- reg = <0x7f0000 0x10000>;
- read-only;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000 0x10000>;
+ read-only;
+ };
+
+ partition@10000 {
+ label = "uboot_env";
+ reg = <0x10000 0x10000>;
+ };
+
+ partition@20000 {
+ label = "firmware";
+ reg = <0x20000 0x7d0000>;
+ };
+
+ boardconfig: partition@400000 {
+ label = "boardconfig";
+ reg = <0x7f0000 0x10000>;
+ read-only;
+ };
};
};
gpio-controller;
lantiq,shadow = <0x0>;
};
-
- mac_addr {
- compatible = "lantiq,eth-mac";
- reg = <0 0x7f0016 0x6>;
- mac-increment = <2>;
- };
-
- ath9k_eep {
- compatible = "ath9k,eeprom";
- reg = <0 0x7f0400 0x1000
- 0 0x7f0016 0x6>;
- ath,mac-increment = <1>;
- ath,pci-slot = <14>;
- ath,eep-endian;
- };
};
gpio: pinmux@E100B10 {
etop@E180000 {
phy-mode = "mii";
+ mtd-mac-address = <&boardconfig 0x16>;
};
ifxhcd@E101000 {
status = "okay";
- gpios = <&gpio 14 0>;
- };
-
- pci@E105400 {
- status = "okay";
- lantiq,external-clock;
- gpio-reset = <&gpio 21 0>;
- req-mask = <0xf>;
+ gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
};
-
};
/*
rfkill {
label = "rfkill";
- gpios = <&gpio 28 1>;
- linux,code = <0xf7>;
+ gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
};
reset {
label = "reset";
- gpios = <&gpio 30 1>;
- linux,code = <0x198>;
+ gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
};
};
compatible = "gpio-leds";
power_green: power {
label = "arv7518pw:green:power";
- gpios = <&gpio 2 1>;
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
dsl: dsl {
label = "arv7518pw:green:dsl";
- gpios = <&gpio 4 1>;
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
online_green: online {
label = "arv7518pw:green:internet";
- gpios = <&gpio 5 1>;
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
};
wifi: wifi {
label = "arv7518pw:green:wlan";
- gpios = <&gpio 6 1>;
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
};
power_red: power2 {
label = "arv7518pw:red:power";
- gpios = <&gpio 7 1>;
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
};
online2 {
label = "arv7518pw:red:internet";
- gpios = <&gpio 8 1>;
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
};
usb: usb {
label = "arv7518pw:green:usb";
- gpios = <&gpio 19 1>;
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
voice {
label = "arv7518pw:green:voip";
- gpios = <&gpiomm 0 1>;
+ gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
};
fxs1 {
label = "arv7518pw:green:phone1";
- gpios = <&gpiomm 1 1>;
+ gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
};
fxs2 {
label = "arv7518pw:green:phone2";
- gpios = <&gpiomm 2 1>;
+ gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
};
unlabeled {
label = "arv7518pw:amber:unlabeled";
- gpios = <&gpiomm 3 1>;
+ gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
};
wps {
label = "arv7518pw:amber:wps";
- gpios = <&gpiomm 4 1>;
+ gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
};
wps2 {
label = "arv7518pw:green:wps";
- gpios = <&gpiomm 5 1>;
+ gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
};
wps3 {
label = "arv7518pw:red:wps";
- gpios = <&gpiomm 6 1>;
+ gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
};
};
};
+
+&pci0 {
+ status = "okay";
+ gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+ lantiq,external-clock;
+ req-mask = <0xf>;
+
+ wifi@168c,0029 {
+ compatible = "pci168c,0029";
+ reg = <0x7000 0 0 0 0>;
+ qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
+ mtd-mac-address = <&boardconfig 0x16>;
+ mtd-mac-address-increment = <1>;
+ };
+};