lantiq: fix console print

[openwrt/staging/chunkeey.git] / target / linux / lantiq / dts / VG3503J.dts

diff --git a/target/linux/lantiq/dts/VG3503J.dts b/target/linux/lantiq/dts/VG3503J.dts
index b4b3cf5aece9263287f46998949ced3850dbf73f..d2a6136d4fdf7c3925f2c4cca26cb84b3826283f 100644 (file)
--- a/target/linux/lantiq/dts/VG3503J.dts
+++ b/target/linux/lantiq/dts/VG3503J.dts
@@ -1,11 +1,162 @@
 /dts-v1/;
 
-/include/ "VG3503J.dtsi"
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
 
 / {
+       model = "VG3503J - BT OpenReach VDSL Modem";
+
+       chosen {
+               bootargs = "console=ttyLTQ0,115200";
+       };
+
+       aliases {
+               led-boot = &power_green;
+               led-failsafe = &power_red;
+               led-running = &power_green;
+
+               led-internet = &dsl;
+       };
+
+       memory@0 {
+               reg = <0x0 0x2000000>;
+       };
+
+       fpi@10000000 {
+               localbus@0 {
+                       ranges = <0 0 0x0 0x3ffffff>;
+                       nor-boot@0 {
+                               compatible = "lantiq,nor";
+                               bank-width = <2>;
+                               reg = <0 0x0 0x2000000>;
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+
+                               partitions {
+                                       compatible = "fixed-partitions";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       partition@0 {
+                                               label = "uboot";
+                                               reg = <0x00000 0x20000>;
+                                       };
+
+                                       partition@20000 {
+                                               label = "firmware";
+                                               reg = <0x20000 0x7d0000>;
+                                       };
+
+                                       partition@7f0000 {
+                                               label = "uboot-env";
+                                               reg = <0x7f0000 0x10000>;
+                                       };
+                               };
+                       };
+               };
+
+               gpio: pinmux@E100B10 {
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&state_default>;
+
+                       state_default: pinmux {
+                               mdio {
+                                       lantiq,groups = "mdio";
+                                       lantiq,function = "mdio";
+                               };
+                               gphy-leds {
+                                       lantiq,groups = "gphy0 led0", "gphy0 led1",
+                                                       "gphy0 led2", "gphy1 led0",
+                                                       "gphy1 led1", "gphy1 led2";
+                                       lantiq,function = "gphy";
+                                       lantiq,pull = <2>;
+                                       lantiq,open-drain = <0>;
+                                       lantiq,output = <1>;
+                               };
+                       };
+               };
+       };
+
        gphy-xrx200 {
                compatible = "lantiq,phy-xrx200";
-               firmware = "lantiq/vr9_phy22f_a1x.bin";
+               firmware1 = "lantiq/vr9_phy11g_a1x.bin";        /*VR9 1.1*/
+               firmware2 = "lantiq/vr9_phy11g_a2x.bin";        /*VR9 1.2*/
                phys = [ 00 01 ];
        };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               power_red: power2 {
+                       label = "vg3503j:red:power";
+                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+               };
+               dsl: dsl {
+                       label = "vg3503j:green:dsl";
+                       gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+               };
+               power_green: power {
+                       label = "vg3503j:green:power";
+                       gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+                       default-state = "keep";
+               };
+       };
+};
+
+&eth0 {
+       interface@0 {
+               compatible = "lantiq,xrx200-pdi";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0>;
+
+               lantiq,switch;
+               ethernet@2 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <2>;
+                       phy-mode = "mii";
+                       phy-handle = <&phy11>;
+               };
+               ethernet@4 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <4>;
+                       phy-mode = "mii";
+                       phy-handle = <&phy13>;
+               };
+       };
+
+       mdio@0 {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               compatible = "lantiq,xrx200-mdio";
+               phy11: ethernet-phy@11 {
+                       reg = <0x11>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+                       lantiq,led1h = <0x70>;
+                       lantiq,led1l = <0x00>;
+                       lantiq,led2h = <0x00>;
+                       lantiq,led2l = <0x03>;
+               };
+               phy13: ethernet-phy@13 {
+                       reg = <0x13>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+                       lantiq,led1h = <0x70>;
+                       lantiq,led1l = <0x00>;
+                       lantiq,led2h = <0x00>;
+                       lantiq,led2l = <0x03>;
+               };
+       };
 };