lantiq: VGV7519 - add vlan support

[openwrt/staging/rmilecki.git] / target / linux / lantiq / dts / VGV7519.dtsi

diff --git a/target/linux/lantiq/dts/VGV7519.dtsi b/target/linux/lantiq/dts/VGV7519.dtsi
index 4a5611449d359a9133ee6a2c1b76affcbffd8372..005cecdddb86b1de79fdb13a9b192a21974b5e96 100644 (file)
--- a/target/linux/lantiq/dts/VGV7519.dtsi
+++ b/target/linux/lantiq/dts/VGV7519.dtsi
@@ -23,54 +23,44 @@
        };
        
        fpi@10000000 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "lantiq,fpi", "simple-bus";
-               ranges = <0x0 0x10000000 0xEEFFFFF>;
-               reg = <0x10000000 0xEF00000>;
-
                localbus@0 {
-                       #address-cells = <2>;
-                       #size-cells = <1>;
-                       compatible = "lantiq,localbus", "simple-bus";
+                       nor-boot@0 {
+                               compatible = "lantiq,nor";
+                               bank-width = <2>;
+                               reg = <0 0x0 0x800000>, <1 0x800000 0x800000>;
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+
+                               partitions {
+                                       compatible = "fixed-partitions";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       boardconfig: partition@40000 {
+                                               label = "board_config";
+                                               reg = <0x40000 0x10000>;
+                                               read-only;
+                                       };
+                               };
+                       };
                };
 
                gpio: pinmux@E100B10 {
-                       compatible = "lantiq,pinctrl-xr9";
                        pinctrl-names = "default";
                        pinctrl-0 = <&state_default>;
 
-                       interrupt-parent = <&icu0>;
-                       interrupts = <166 135 66 40 41 42 38>;
-
-                       #gpio-cells = <2>;
-                       gpio-controller;
-                       reg = <0xE100B10 0xA0>;
-
                        state_default: pinmux {
                                stp {
                                        lantiq,groups = "stp";
                                        lantiq,function = "stp";
-                               };
-                               spi {
-                                       lantiq,groups = "spi";
-                                       lantiq,function = "spi";
+                                       lantiq,open-drain = <0>;
+                                       lantiq,output = <1>;
+                                       lantiq,pull = <0>;
                                };
                                mdio {
                                        lantiq,groups = "mdio";
                                        lantiq,function = "mdio";
                                };
-                               gphy-leds_out {
-                                       lantiq,pins = "io7", "io44";
-                                       lantiq,pull = <0>;
-                                       lantiq,output = <1>;
-                               };
-                               stp_out {
-                                       lantiq,pins = "io4", "io5", "io6";
-                                       lantiq,open-drain = <0>;
-                                       lantiq,output = <1>;
-                                       lantiq,pull = <0>;
-                               };
                                pci-rst {
                                        lantiq,pins = "io21";
                                        lantiq,open-drain = <0>;
@@ -107,21 +97,14 @@
                        lantiq,portmask = <0x3>;
                };
 
+               ifxhcd@E106000 {
+                       status = "okay";
+                       gpios = <&gpio 32 0>;
+               };
+
                pci@E105400 {
                        status = "okay";
-                       #address-cells = <3>;
-                       #size-cells = <2>;
-                       #interrupt-cells = <1>;
-                       compatible = "lantiq,pci-xway";
-                       bus-range = <0x0 0x0>;
-                       ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000   /* pci memory */
-                               0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
-                       reg = <0x7000000 0x8000         /* config space */
-                               0xE105400 0x400>;       /* pci bridge */
                        lantiq,bus-clock = <33333333>;
-                       /*lantiq,external-clock;*/
-                       lantiq,delay-hi = <0>; /* 0ns delay */
-                       lantiq,delay-lo = <0>; /* 0.0ns delay */
                        interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
                        interrupt-map = <
                                0x7000 0 0 1 &icu0 30 1 // slot 14, irq 30
@@ -244,6 +227,7 @@
                #size-cells = <0>;
                reg = <0>;
                mac-address = [ 00 11 22 33 44 55 ];
+               lantiq,switch;
 
                ethernet@0 {
                        compatible = "lantiq,xrx200-pdi-port";
@@ -278,6 +262,7 @@
                reg = <1>;
                mac-address = [ 00 11 22 33 44 56 ];
                lantiq,wan;
+
                ethernet@5 {
                        compatible = "lantiq,xrx200-pdi-port";
                        reg = <5>;
@@ -293,27 +278,22 @@
                phy0: ethernet-phy@0 {
                        reg = <0x0>;
                        compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                       lantiq,c45-reg-init = <1 0 0 0>;
                };
                phy1: ethernet-phy@1 {
                        reg = <0x1>;
                        compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                       lantiq,c45-reg-init = <1 0 0 0>;
                };
                phy5: ethernet-phy@5 {
                        reg = <0x5>;
                        compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                       lantiq,c45-reg-init = <1 0 0 0>;
                };
                phy11: ethernet-phy@11 {
                        reg = <0x11>;
                        compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                       lantiq,c45-reg-init = <1 0 0 0>;
                };
                phy13: ethernet-phy@13 {
                        reg = <0x13>;
                        compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                       lantiq,c45-reg-init = <1 0 0 0>;
                };
        };
 };