#include "vr9.dtsi"
-/ {
-
- model = "VGV7519 - KPN Experiabox V8";
+#include <dt-bindings/input/input.h>
+/ {
chosen {
- bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+ bootargs = "console=ttyLTQ0,115200 init=/etc/preinit mem=62M vpe1_load_addr=0x83e00000 vpe1_mem=2M maxvpes=1 maxtcs=1";
};
aliases {
led-wifi = &wireless_green;
};
+ sram@1F000000 {
+ vmmc@107000 {
+ status = "okay";
+ gpios = <&gpio 30 GPIO_ACTIVE_HIGH //fxs relay
+ &gpio 31 GPIO_ACTIVE_HIGH //still unknown
+ &gpio 3 GPIO_ACTIVE_HIGH>; //reset_slic?
+ };
+ };
+
memory@0 {
reg = <0x0 0x4000000>;
};
gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
};
- pci@E105400 {
- status = "okay";
- lantiq,bus-clock = <33333333>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- 0x7000 0 0 1 &icu0 30 1 // slot 14, irq 30
- >;
- gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
- req-mask = <0x1>; /* GNT1 */
- };
-
pcie@d900000 {
status = "disabled";
};
phys = [ 00 01 ];
};
- ralink_eep {
- compatible = "ralink,eeprom";
- ralink,eeprom = "RT2860.eeprom";
- };
-
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
eco {
label = "eco";
gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
+ linux,code = <BTN_0>;
};
rfkill {
label = "rfkill";
};
};
+&pci0 {
+ status = "okay";
+ gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+ wifi@1814,3091 {
+ compatible = "pci1814,3091";
+ reg = <0x7000 0 0 0 0>;
+ ralink,mtd-eeprom = <&boardconfig 0x410>;
+ ralink,mtd-eeprom-swap;
+ mtd-mac-address = <&boardconfig 0x16>;
+ mtd-mac-address-increment = <1>;
+ };
+};
+
ð0 {
lan: interface@0 {
compatible = "lantiq,xrx200-pdi";
#size-cells = <0>;
reg = <0>;
mtd-mac-address = <&boardconfig 0x16>;
+ mtd-mac-address-increment = <1>;
lantiq,switch;
ethernet@0 {
#size-cells = <0>;
reg = <1>;
mtd-mac-address = <&boardconfig 0x16>;
- mtd-mac-address-increment = <2>;
lantiq,wan;
ethernet@5 {