led-boot = &power_orange;
led-failsafe = &power_red;
led-running = &power_blue;
+ led-upgrade = &power_blue;
led-dsl = &broadband_blue;
led-wifi = &wireless_blue;
reg = <0x0 0x4000000>;
};
- sram@1F000000 {
- vmmc@107000 {
- status = "okay";
- gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
- };
- };
-
- fpi@10000000 {
- localbus@0 {
- nor-boot@0 { /* NOR Flash: Spansion S29AL004D 512KB */
- compatible = "lantiq,nor"; /* "AMD AM29LV400BB" compatible on 3.3.8 */
- lantiq,cs = <0>;
- bank-width = <2>;
- reg = <0 0x0 0x80000>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x00000 0x40000>; /* 256KB */
- };
-
- partition@40000 {
- label = "uboot_env";
- reg = <0x40000 0x10000>; /* 64KB */
- };
-
- partition@50000 {
- label = "rg_conf_1";
- reg = <0x50000 0x10000>;
- };
-
- partition@60000 {
- label = "rg_conf_2";
- reg = <0x60000 0x10000>;
- };
-
- partition@70000 {
- label = "rg_conf_factory";
- reg = <0x70000 0x10000>;
- };
- };
- };
-
- nand-parts@0 { /* NAND Flash: Samsung K9F5608U0D-JIB0 32MB */
- compatible = "lantiq,nand-xway";
- lantiq,cs = <1>;
- bank-width = <2>;
- reg = <1 0x0 0x2000000 >;
- #address-cells = <1>;
- #size-cells = <1>;
- req-mask = <0x1>; /* PCI request lines to mask during NAND access */
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- ath9k_cal: partition@0 {
- label = "art"; /* Atheros 9160 wifi b/g/n radio EEPROM */
- reg = <0x00000 0x4000>;
- read-only;
- };
-
- partition@4000 {
- label = "kernel";
- reg = <0x4000 0x200000>;
- };
-
- partition@164000 {
- label = "ubi";
- reg = <0x204000 0x1DFC000>;
- };
- };
- };
- };
-
- gpio: pinmux@E100B10 {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- nand_out {
- lantiq,groups = "nand cle", "nand ale";
- lantiq,function = "ebu";
- lantiq,output = <1>;
- lantiq,open-drain = <0>;
- lantiq,pull = <0>;
- };
- nand_cs1 {
- lantiq,groups = "nand cs1";
- lantiq,function = "ebu";
- lantiq,open-drain = <0>;
- lantiq,pull = <0>;
- };
- exin {
- lantiq,groups = "exin1";
- lantiq,function = "exin";
- };
- pci_in {
- lantiq,groups = "req1";
- lantiq,function = "pci";
- lantiq,output = <0>;
- lantiq,open-drain = <1>;
- lantiq,pull = <2>;
- };
- pci_out {
- lantiq,groups = "gnt1";
- lantiq,function = "pci";
- lantiq,output = <1>;
- lantiq,open-drain = <0>;
- lantiq,pull = <0>;
- };
-
- pci_rst {
- lantiq,pins = "io21";
- lantiq,output = <1>;
- lantiq,open-drain = <0>;
- };
-
- btn_in {
- lantiq,pins = "io2", "io15", "io22";
- lantiq,output = <0>;
- lantiq,open-drain = <1>;
- lantiq,pull = <2>;
- };
- };
- };
-
- etop@E180000 {
- phy-mode = "rmii";
- };
-
- ifxhcd@E101000 {
- status = "okay";
- };
-
- gpios: stp@E100BB0 {
- status = "okay";
- };
- };
-
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
};
};
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ nand_out {
+ lantiq,groups = "nand cle", "nand ale";
+ lantiq,function = "ebu";
+ lantiq,output = <1>;
+ lantiq,open-drain = <0>;
+ lantiq,pull = <0>;
+ };
+ nand_cs1 {
+ lantiq,groups = "nand cs1";
+ lantiq,function = "ebu";
+ lantiq,open-drain = <0>;
+ lantiq,pull = <0>;
+ };
+ exin {
+ lantiq,groups = "exin1";
+ lantiq,function = "exin";
+ };
+ pci_in {
+ lantiq,groups = "req1";
+ lantiq,function = "pci";
+ lantiq,output = <0>;
+ lantiq,open-drain = <1>;
+ lantiq,pull = <2>;
+ };
+ pci_out {
+ lantiq,groups = "gnt1";
+ lantiq,function = "pci";
+ lantiq,output = <1>;
+ lantiq,open-drain = <0>;
+ lantiq,pull = <0>;
+ };
+
+ pci_rst {
+ lantiq,pins = "io21";
+ lantiq,output = <1>;
+ lantiq,open-drain = <0>;
+ };
+
+ btn_in {
+ lantiq,pins = "io2", "io15", "io22";
+ lantiq,output = <0>;
+ lantiq,open-drain = <1>;
+ lantiq,pull = <2>;
+ };
+ };
+};
+
+&gpios {
+ status = "okay";
+};
+
+&gsw {
+ phy-mode = "rmii";
+};
+
+&localbus {
+ nor@0 { /* NOR Flash: Spansion S29AL004D 512KB */
+ compatible = "lantiq,nor"; /* "AMD AM29LV400BB" compatible on 3.3.8 */
+ lantiq,cs = <0>;
+ bank-width = <2>;
+ reg = <0 0x0 0x80000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000 0x40000>; /* 256KB */
+ };
+
+ partition@40000 {
+ label = "uboot_env";
+ reg = <0x40000 0x10000>; /* 64KB */
+ };
+
+ partition@50000 {
+ label = "rg_conf_1";
+ reg = <0x50000 0x10000>;
+ };
+
+ partition@60000 {
+ label = "rg_conf_2";
+ reg = <0x60000 0x10000>;
+ };
+
+ partition@70000 {
+ label = "rg_conf_factory";
+ reg = <0x70000 0x10000>;
+ };
+ };
+ };
+
+ nand@1 { /* NAND Flash: Samsung K9F5608U0D-JIB0 32MB */
+ compatible = "lantiq,nand-xway";
+ lantiq,cs = <1>;
+ bank-width = <2>;
+ reg = <1 0x0 0x2000000 >;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ req-mask = <0x1>; /* PCI request lines to mask during NAND access */
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ath9k_cal: partition@0 {
+ label = "art"; /* Atheros 9160 wifi b/g/n radio EEPROM */
+ reg = <0x00000 0x4000>;
+ read-only;
+ };
+
+ partition@4000 {
+ label = "kernel";
+ reg = <0x4000 0x200000>;
+ };
+
+ partition@164000 {
+ label = "ubi";
+ reg = <0x204000 0x1DFC000>;
+ };
+ };
+ };
+};
+
&pci0 {
status = "okay";
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
};
};
+
+&usb_phy {
+ status = "okay";
+};
+
+&usb {
+ status = "okay";
+};
+
+&vmmc {
+ status = "okay";
+ gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
+};
projects / openwrt / staging / hauke.git / blobdiff