lantiq: kernel 4.14: cleanup dts files

[openwrt/staging/blogic.git] / target / linux / lantiq / files-4.14 / arch / mips / boot / dts / VR200v.dts

diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VR200v.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VR200v.dts
index 6eccc5bdd96f2b00e4462bd1d189b3a9e15337f4..ccdc9d7363ae0c09e3f12853d41ca1c5569ad388 100644 (file)
--- a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VR200v.dts
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VR200v.dts
@@ -18,74 +18,14 @@
 
                led-dsl = &dsl;
                led-internet = &internet;
-               led-usb = &usb;
-               led-usb2 = &usb;
+               led-usb = &led_usb;
+               led-usb2 = &led_usb;
        };
 
        memory@0 {
                reg = <0x0 0x7f00000>;
        };
 
-       fpi@10000000 {
-               gpio: pinmux@E100B10 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&state_default>;
-
-                       state_default: pinmux {
-                               mdio {
-                                       lantiq,groups = "mdio";
-                                       lantiq,function = "mdio";
-                               };
-                               gphy-leds {
-                                       lantiq,groups = "gphy0 led1", "gphy1 led1";
-                                       lantiq,function = "gphy";
-                                       lantiq,pull = <2>;
-                                       lantiq,open-drain = <0>;
-                                       lantiq,output = <1>;
-                               };
-                               phy-rst {
-                                       lantiq,pins = "io42";
-                                       lantiq,pull = <0>;
-                                       lantiq,open-drain = <0>;
-                                       lantiq,output = <1>;
-                               };
-                               pcie-rst {
-                                       lantiq,pins = "io38";
-                                       lantiq,pull = <0>;
-                                       lantiq,output = <1>;
-                               };
-                       };
-                       pins_spi_default: pins_spi_default {
-                               spi_in {
-                                       lantiq,groups = "spi_di";
-                                       lantiq,function = "spi";
-                               };
-                               spi_out {
-                                       lantiq,groups = "spi_do", "spi_clk",
-                                               "spi_cs4";
-                                       lantiq,function = "spi";
-                                       lantiq,output = <1>;
-                               };
-                       };
-               };
-
-               ifxhcd@E101000 {
-                       status = "okay";
-                       gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
-                       lantiq,portmask = <0x3>;
-               };
-
-               ifxhcd@E106000 {
-                       status = "okay";
-                       gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
-               };
-
-               pci0: pci@E105400 {
-                       status = "okay";
-                       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-               };
-       };
-
        gphy-xrx200 {
                compatible = "lantiq,phy-xrx200";
                firmware = "lantiq/xrx200_phy11g_a22.bin";
@@ -137,7 +77,7 @@
                        label = "vr200v:blue:internet";
                        gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
                };
-               usb: usb {
+               led_usb: usb {
                        label = "vr200v:blue:usb";
                        gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
                };
@@ -160,12 +100,120 @@
        };
 };
 
+&eth0 {
+       lan: interface@0 {
+               compatible = "lantiq,xrx200-pdi";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0>;
+               mtd-mac-address = <&romfile 0xf100>;
+               lantiq,switch;
+
+               ethernet@0 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <0>;
+                       phy-mode = "rgmii";
+                       phy-handle = <&phy0>;
+                       // gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
+               };
+               ethernet@5 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <5>;
+                       phy-mode = "rgmii";
+                       phy-handle = <&phy5>;
+               };
+               ethernet@2 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <2>;
+                       phy-mode = "gmii";
+                       phy-handle = <&phy11>;
+               };
+               ethernet@3 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <4>;
+                       phy-mode = "gmii";
+                       phy-handle = <&phy13>;
+               };
+       };
+
+       mdio@0 {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               compatible = "lantiq,xrx200-mdio";
+               reg = <0>;
+
+               phy0: ethernet-phy@0 {
+                       reg = <0x0>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy5: ethernet-phy@5 {
+                       reg = <0x5>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy11: ethernet-phy@11 {
+                       reg = <0x11>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy13: ethernet-phy@13 {
+                       reg = <0x13>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+       };
+};
+
+&gpio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&state_default>;
+
+       state_default: pinmux {
+               mdio {
+                       lantiq,groups = "mdio";
+                       lantiq,function = "mdio";
+               };
+               gphy-leds {
+                       lantiq,groups = "gphy0 led1", "gphy1 led1";
+                       lantiq,function = "gphy";
+                       lantiq,pull = <2>;
+                       lantiq,open-drain = <0>;
+                       lantiq,output = <1>;
+               };
+               phy-rst {
+                       lantiq,pins = "io42";
+                       lantiq,pull = <0>;
+                       lantiq,open-drain = <0>;
+                       lantiq,output = <1>;
+               };
+               pcie-rst {
+                       lantiq,pins = "io38";
+                       lantiq,pull = <0>;
+                       lantiq,output = <1>;
+               };
+       };
+       pins_spi_default: pins_spi_default {
+               spi_in {
+                       lantiq,groups = "spi_di";
+                       lantiq,function = "spi";
+               };
+               spi_out {
+                       lantiq,groups = "spi_do", "spi_clk",
+                               "spi_cs4";
+                       lantiq,function = "spi";
+                       lantiq,output = <1>;
+               };
+       };
+};
+
+&pci0 {
+       status = "okay";
+       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+};
+
 &spi {
+       status = "okay";
+
        pinctrl-names = "default";
        pinctrl-0 = <&pins_spi_default>;
 
-       status = "ok";
-
        m25p80@4 {
                #address-cells = <1>;
                #size-cells = <1>;
@@ -223,61 +271,13 @@
        };
 };
 
-&eth0 {
-       lan: interface@0 {
-               compatible = "lantiq,xrx200-pdi";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               reg = <0>;
-               mtd-mac-address = <&romfile 0xf100>;
-               lantiq,switch;
-
-               ethernet@0 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <0>;
-                       phy-mode = "rgmii";
-                       phy-handle = <&phy0>;
-                       // gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
-               };
-               ethernet@5 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <5>;
-                       phy-mode = "rgmii";
-                       phy-handle = <&phy5>;
-               };
-               ethernet@2 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <2>;
-                       phy-mode = "gmii";
-                       phy-handle = <&phy11>;
-               };
-               ethernet@3 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <4>;
-                       phy-mode = "gmii";
-                       phy-handle = <&phy13>;
-               };
-       };
+&usb0 {
+       status = "okay";
+       gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
+       lantiq,portmask = <0x3>;
+};
 
-       mdio@0 {
-               #address-cells = <1>;
-               #size-cells = <0>;
-               compatible = "lantiq,xrx200-mdio";
-               phy0: ethernet-phy@0 {
-                       reg = <0x0>;
-                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-               };
-               phy5: ethernet-phy@5 {
-                       reg = <0x5>;
-                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-               };
-               phy11: ethernet-phy@11 {
-                       reg = <0x11>;
-                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-               };
-               phy13: ethernet-phy@13 {
-                       reg = <0x13>;
-                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-               };
-       };
+&usb1 {
+       status = "okay";
+       gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
 };