mediatek: add Zyxel EX5601-T0 with uboot custom partition

[openwrt/staging/hauke.git] / target / linux / mediatek / filogic / base-files / etc / board.d / 01_leds

diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
index f851c7ed54bbfbede82603dad6bef5e02bca0a7c..84a8cfbc0be2657492ff03ae7e9b3f59a13246a9 100644 (file)
--- a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
+++ b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
@@ -6,9 +6,36 @@ board=$(board_name)
 board_config_update
 
 case $board in
-xiaomi,redmi-router-ax6000)
+cudy,wr3000-v1)
+       ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan"
+       ;;
+mercusys,mr90x-v1)
+       ucidef_set_led_netdev "lan0" "lan0" "green:lan0" "lan0" "link tx rx"
+       ucidef_set_led_netdev "lan1" "lan2" "green:lan1" "lan1" "link tx rx"
+       ucidef_set_led_netdev "lan2" "lan2" "green:lan2" "lan2" "link tx rx"
+       ucidef_set_led_netdev "wan" "wan" "green:wan" "eth1" "link tx rx"
+       ;;
+netgear,wax220)
+       ucidef_set_led_netdev "eth0" "LAN" "green:lan" "eth0"
+       ucidef_set_led_netdev "wlan2g" "WLAN2G" "blue:wlan2g" "phy0-ap0"
+       ucidef_set_led_netdev "wlan5g" "WLAN5G" "blue:wlan5g" "phy1-ap0"
+       ;;
+xiaomi,mi-router-wr30u-112m-nmbm|\
+xiaomi,mi-router-wr30u-stock|\
+xiaomi,mi-router-wr30u-ubootmod)
+       ucidef_set_led_netdev "wan" "wan" "blue:network" "wan"
+       ;;
+xiaomi,redmi-router-ax6000-stock|\
+xiaomi,redmi-router-ax6000-ubootmod)
        ucidef_set_led_netdev "wan" "wan" "rgb:network" "wan"
        ;;
+zyxel_ex5601-t0-stock|\
+zyxel,ex5601-t0-ubootmod)
+       ucidef_set_led_netdev "lan" "LAN" "green:lan" "eth0" "link tx rx"
+       ucidef_set_led_netdev "wan" "WAN" "green:inet" "eth1" "link tx rx"
+       ucidef_set_led_netdev "wifi-24g" "WIFI-2.4G" "green:wifi24g" "phy0-ap0" "link tx rx"
+       ucidef_set_led_netdev "wifi-5g" "WIFI-5G" "green:wifi5g" "phy1-ap0" "link tx rx"
+        ;;
 esac
 
 board_config_flush