mediatek: filogic: add support for Cudy RE3000 v1

[openwrt/staging/mans0n.git] / target / linux / mediatek / filogic / base-files / etc / board.d / 02_network

diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
index 5542f1518afae2c8ddb4a89de362744ac6fa410d..dbda950cc500e90672efffe50b3d14f9141c5802 100644 (file)
--- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
+++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
@@ -70,6 +70,7 @@ mediatek_setup_interfaces()
        mercusys,mr90x-v1)
                ucidef_set_interfaces_lan_wan "lan0 lan1 lan2" eth1
                ;;
+       cudy,re3000-v1|\
        netgear,wax220|\
        ubnt,unifi-6-plus|\
        zyxel,nwa50ax-pro)
@@ -109,14 +110,6 @@ mediatek_setup_macs()
        local label_mac=""
 
        case $board in
-       asus,rt-ax59u|\
-       asus,tuf-ax4200|\
-       asus,tuf-ax6000)
-               CI_UBIPART="UBI_DEV"
-               addr=$(mtd_get_mac_binary_ubi "Factory" 0x4)
-               wan_mac="${addr}"
-               lan_mac="${addr}"
-               ;;
        bananapi,bpi-r3)
                wan_mac=$(macaddr_add $(cat /sys/class/net/eth0/address) 1)
                ;;
@@ -129,16 +122,6 @@ mediatek_setup_macs()
                ;;
                esac
                ;;
-       glinet,gl-mt2500)
-               label_mac="$(get_mac_binary "/dev/mmcblk0boot1" 0xA)"
-               wan_mac="$label_mac"
-               lan_mac="$(macaddr_add $label_mac 1)"
-               ;;
-       glinet,gl-mt6000)
-               label_mac=$(mmc_get_mac_binary factory 0x0a)
-               wan_mac=$label_mac
-               lan_mac=$(macaddr_add "$label_mac" 2)
-               ;;
        h3c,magic-nx30-pro)
                wan_mac=$(mtd_get_mac_ascii pdt_data_1 ethaddr)
                lan_mac=$(macaddr_add "$wan_mac" 1)