chosen {
bootargs-override = "console=ttyS0,115200";
+ linux,stdout-path = &serial0;
};
memory {
wifi1 {
gpios = <&spi_gpio 3 GPIO_ACTIVE_HIGH>;
- label = "ws-ap3825i:green:radio1";
+ label = "green:radio1";
linux,default-trigger = "phy0tpt";
};
wifi2 {
gpios = <&spi_gpio 2 GPIO_ACTIVE_HIGH>;
- label = "ws-ap3825i:green:radio2";
+ label = "green:radio2";
linux,default-trigger = "phy1tpt";
};
led_power_green: power_green {
gpios = <&spi_gpio 0 GPIO_ACTIVE_HIGH>;
- label = "ws-ap3825i:green:power";
+ label = "green:power";
};
led_power_red: power_red {
gpios = <&spi_gpio 1 GPIO_ACTIVE_HIGH>;
- label = "ws-ap3825i:red:power";
+ label = "red:power";
};
- eth0_red {
+ lan1_red {
gpios = <&spi_gpio 6 GPIO_ACTIVE_HIGH>;
- label = "ws-ap3825i:red:eth0";
+ label = "red:lan1";
};
- eth0_green {
+ lan1_green {
gpios = <&spi_gpio 4 GPIO_ACTIVE_HIGH>;
- label = "ws-ap3825i:green:eth0";
+ label = "green:lan1";
};
- eth1_red {
+ lan2_red {
gpios = <&spi_gpio 7 GPIO_ACTIVE_HIGH>;
- label = "ws-ap3825i:red:eth1";
+ label = "red:lan2";
};
- eth1_green {
+ lan2_green {
gpios = <&spi_gpio 5 GPIO_ACTIVE_HIGH>;
- label = "ws-ap3825i:green:eth1";
+ label = "green:lan2";
};
};
partition@3f00000 {
reg = <0x3f00000 0x20000>;
label = "cfg2";
- read-only;
};
partition@3f20000 {
reg = <0x3f20000 0x20000>;
label = "cfg1";
- read-only;
};
};
};
mdio@24000 {
phy0: ethernet-phy@0 {
- interrupts = <3 1 0 0>;
+ /* interrupts = <3 1 0 0>; */
reg = <0x5>;
reset-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <10000>;
};
phy2: ethernet-phy@2 {
- interrupts = <1 1 0 0>;
+ /* interrupts = <1 1 0 0>; */
reg = <0x6>;
reset-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <10000>;
};
};
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
reg = <0 0xffe09000 0 0x1000>;
+
+ /* Filled by U-Boot */
+ bus-range = <0x00 0x01>;
+ dma-ranges = <0x2000000 0x00 0xfff00000 0x00 0xffe00000
+ 0x00 0x100000 0x42000000 0x00 0x00 0x00
+ 0x00 0x00 0x10000000>;
+
pcie@0 {
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
reg = <0 0xffe0a000 0 0x1000>;
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+
+ /* Filled by U-Boot */
+ bus-range = <0x00 0x01>;
+ dma-ranges = <0x2000000 0x00 0xfff00000 0x00
+ 0xffe00000 0x00 0x100000 0x42000000
+ 0x00 0x00 0x00 0x00 0x00 0x10000000>;
+
pcie@0 {
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
};
/include/ "fsl/p1020si-post.dtsi"
+
+/ {
+ cpus {
+ PowerPC,P1020@0 {
+ bus-frequency = <399999996>;
+ timebase-frequency = <50000000>;
+ clock-frequency = <799999992>;
+ d-cache-block-size = <0x20>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <0x80>;
+ i-cache-block-size = <0x20>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <0x80>;
+ cpu-release-addr = <0x0 0x0ffff280>;
+ status = "okay";
+ enable-method = "spin-table";
+ };
+
+ PowerPC,P1020@1 {
+ bus-frequency = <399999996>;
+ timebase-frequency = <50000000>;
+ clock-frequency = <799999992>;
+ d-cache-block-size = <0x20>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <0x80>;
+ i-cache-block-size = <0x20>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <0x80>;
+ cpu-release-addr = <0x0 0x0ffff2a0>;
+ status = "disabled";
+ enable-method = "spin-table";
+ };
+ };
+
+ memory {
+ /* Reserve upper MB for second-core-bootpage */
+ reg = <0x0 0x0 0x0 0xff00000>;
+ };
+
+ soc@ffe00000 {
+ bus-frequency = <399999996>;
+
+ serial@4600 {
+ clock-frequency = <399999996>;
+ };
+
+ serial@4500 {
+ clock-frequency = <399999996>;
+ };
+
+ pic@40000 {
+ clock-frequency = <399999996>;
+ };
+ };
+
+ localbus@ffe05000 {
+ bus-frequency = <24999999>;
+ };
+};
+
+&enet0 {
+ rx-stash-idx = <0x00>;
+ rx-stash-len = <0x60>;
+ bd-stash;
+};
+
+&enet2 {
+ rx-stash-idx = <0x00>;
+ rx-stash-len = <0x60>;
+ bd-stash;
+};
+
+/*
+ * For the OpenWrt 22.03 release, since Linux 5.10.138 now uses
+ * aliases to determine PCI domain numbers, drop aliases so as not to
+ * change the sysfs path of our wireless netdevs.
+ */
+
+/ {
+ aliases {
+ /delete-property/ pci0;
+ /delete-property/ pci1;
+ };
+};