mpc85xx: add localbus frequency for WS-AP3825i

[openwrt/staging/nbd.git] / target / linux / mpc85xx / files / arch / powerpc / boot / dts / ws-ap3825i.dts

diff --git a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3825i.dts b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3825i.dts
index 2ea671846810088a2dac0127dd489c8795293e5d..f28ebf05a1fb530f4c1c1d42592266b25f562040 100644 (file)
--- a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3825i.dts
+++ b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3825i.dts
@@ -20,6 +20,7 @@
 
        chosen {
                bootargs-override = "console=ttyS0,115200";
+               linux,stdout-path = &serial0;
        };
 
        memory {
@@ -126,13 +127,11 @@
                                partition@3f00000 {
                                        reg = <0x3f00000 0x20000>;
                                        label = "cfg2";
-                                       read-only;
                                };
 
                                partition@3f20000 {
                                        reg = <0x3f20000 0x20000>;
                                        label = "cfg1";
-                                       read-only;
                                };
                        };
                };
@@ -146,7 +145,7 @@
 
                mdio@24000 {
                        phy0: ethernet-phy@0 {
-                               interrupts = <3 1 0 0>;
+                               /* interrupts = <3 1 0 0>; */
                                reg = <0x5>;
                                reset-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
                                reset-assert-us = <10000>;
@@ -154,7 +153,7 @@
                        };
 
                        phy2: ethernet-phy@2 {
-                               interrupts = <1 1 0 0>;
+                               /* interrupts = <1 1 0 0>; */
                                reg = <0x6>;
                                reset-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
                                reset-assert-us = <10000>;
@@ -254,6 +253,58 @@
 
 /include/ "fsl/p1020si-post.dtsi"
 
+/ {
+       cpus {
+               PowerPC,P1010@0 {
+                       bus-frequency = <399999996>;
+                       timebase-frequency = <50000000>;
+                       clock-frequency = <799999992>;
+                       d-cache-block-size = <0x20>;
+                       d-cache-size = <0x8000>;
+                       d-cache-sets = <0x80>;
+                       i-cache-block-size = <0x20>;
+                       i-cache-size = <0x8000>;
+                       i-cache-sets = <0x80>;
+               };
+
+               PowerPC,P1010@1 {
+                       bus-frequency = <399999996>;
+                       timebase-frequency = <50000000>;
+                       clock-frequency = <799999992>;
+                       d-cache-block-size = <0x20>;
+                       d-cache-size = <0x8000>;
+                       d-cache-sets = <0x80>;
+                       i-cache-block-size = <0x20>;
+                       i-cache-size = <0x8000>;
+                       i-cache-sets = <0x80>;
+               };
+       };
+
+       memory {
+               reg = <0x0 0x0 0x0 0x10000000>;
+       };
+
+       soc@ffe00000 {
+               bus-frequency = <399999996>;
+
+               serial@4600 {
+                       clock-frequency = <399999996>;
+               };
+
+               serial@4500 {
+                       clock-frequency = <399999996>;
+               };
+
+               pic@40000 {
+                       clock-frequency = <399999996>;
+               };
+       };
+
+       localbus@ffe05000 {
+               bus-frequency = <24999999>;
+       };
+};
+
 /*
  * For the OpenWrt 22.03 release, since Linux 5.10.138 now uses
  * aliases to determine PCI domain numbers, drop aliases so as not to