chosen {
bootargs-override = "console=ttyS0,115200";
+ linux,stdout-path = &serial0;
};
memory {
mdio@24000 {
phy0: ethernet-phy@0 {
- interrupts = <3 1 0 0>;
+ /* interrupts = <3 1 0 0>; */
reg = <0x5>;
reset-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
reset-assert-us = <10000>;
};
phy2: ethernet-phy@2 {
- interrupts = <1 1 0 0>;
+ /* interrupts = <1 1 0 0>; */
reg = <0x6>;
reset-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
reset-assert-us = <10000>;
/include/ "fsl/p1020si-post.dtsi"
+/ {
+ cpus {
+ PowerPC,P1010@0 {
+ bus-frequency = <399999996>;
+ timebase-frequency = <50000000>;
+ clock-frequency = <799999992>;
+ d-cache-block-size = <0x20>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <0x80>;
+ i-cache-block-size = <0x20>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <0x80>;
+ };
+
+ PowerPC,P1010@1 {
+ bus-frequency = <399999996>;
+ timebase-frequency = <50000000>;
+ clock-frequency = <799999992>;
+ d-cache-block-size = <0x20>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <0x80>;
+ i-cache-block-size = <0x20>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <0x80>;
+ };
+ };
+
+ memory {
+ reg = <0x0 0x0 0x0 0x10000000>;
+ };
+
+ soc@ffe00000 {
+ bus-frequency = <399999996>;
+
+ serial@4600 {
+ clock-frequency = <399999996>;
+ };
+
+ serial@4500 {
+ clock-frequency = <399999996>;
+ };
+
+ pic@40000 {
+ clock-frequency = <399999996>;
+ };
+ };
+
+ localbus@ffe05000 {
+ bus-frequency = <24999999>;
+ };
+};
+
/*
* For the OpenWrt 22.03 release, since Linux 5.10.138 now uses
* aliases to determine PCI domain numbers, drop aliases so as not to