* is used, the CONFIG_DEBUG_MVEBU_UART_ALTERNATE option should be
* used.
*
- * Copyright (C) 2013 Marvell
+ * Copyright (C) 2014 Imre Kaloz <kaloz@openwrt.org>
*
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ * Based on armada-xp-axpwifiap.dts:
+ *
+ * Copyright (C) 2013 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
*/
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
#include "armada-xp-mv78230.dtsi"
/ {
internal-regs {
pinctrl {
- pinctrl-0 = <&pmx_phy_int>;
- pinctrl-names = "default";
-
pmx_ge0: pmx-ge0 {
marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
"mpp4", "mpp5", "mpp6", "mpp7",
};
pmx_keys: pmx-keys {
- marvell,pins = "mpp33";
+ marvell,pins = "mpp32", "mpp33";
marvell,function = "gpio";
};
marvell,function = "spi";
};
- pmx_phy_int: pmx-phy-int {
- marvell,pins = "mpp32";
+ power_led_pin: power-led-pin {
+ marvell,pins = "mpp40";
marvell,function = "gpio";
};
+
+ gpio_fan_pin: gpio-fan-pin {
+ marvell,pins = "mpp24";
+ marvell,function = "gpio";
+ };
+
};
serial@12000 {
status = "okay";
};
- mdio {
- disabled;
- };
-
ethernet@70000 {
pinctrl-0 = <&pmx_ge0>;
pinctrl-names = "default";
status = "okay";
clock-frequency = <100000>;
+ tmp421@4c {
+ compatible = "ti,tmp421";
+ reg = <0x4c>;
+ };
+
tlc59116@68 {
#gpio-cells = <2>;
compatible = "gpio,tlc59116";
};
partition@100000 {
- label = "u_env"; //u-boot-env?
+ label = "u_env";
reg = <0x100000 0x40000>; /* 256KB */
- read-only;
};
partition@140000 {
label = "s_env";
reg = <0x140000 0x40000>; /* 256KB */
- read-only;
};
partition@900000 {
label = "devinfo";
reg = <0x900000 0x100000>; /* 1MB */
+ read-only;
};
partition@a00000 {
- label = "kernel";
- reg = <0xa00000 0x2800000>; /* 40MB */
+ label = "kernel1";
+ reg = <0xa00000 0x2800000>; /* 3MB */
};
partition@d00000 {
- label = "rootfs";
+ label = "rootfs1";
reg = <0xd00000 0x2500000>; /* 37MB */
};
partition@3200000 {
- label = "alt_kernel";
- reg = <0x3200000 0x2800000>; /* 40MB */
+ label = "kernel2";
+ reg = <0x3200000 0x2800000>; /* 3MB */
};
partition@3500000 {
- label = "alt_rootfs";
+ label = "rootfs2";
reg = <0x3500000 0x2500000>; /* 37MB */
};
/* Last MB is for the BBT, i.e. not writable */
partition@5a00000 {
label = "syscfg";
- reg = <0x5a00000 0x2600000>; /* ?MB */
+ reg = <0x5a00000 0x2600000>; /* 38MB */
};
};
pinctrl-names = "default";
button@1 {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ button@2 {
label = "Factory Reset Button";
- linux,code = <141>; /* KEY_SETUP */
- gpios = <&gpio1 1 1>;
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&power_led_pin>;
+ pinctrl-names = "default";
+
+ power {
+ label = "mamba:white:power";
+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
};
};
+
+ gpio_fan {
+ /* SUNON HA4010V4-0000-C99 */
+ compatible = "gpio-fan";
+ gpios = <&gpio0 24 0>;
+
+ gpio-fan,speed-map = <0 0
+ 4500 1>;
+ };
+
+ mvsw61xx {
+ compatible = "marvell,88e6171";
+ status = "okay";
+ reg = <0x10>;
+
+ mii-bus = <&mdio>;
+ cpu-port-0 = <5>;
+ cpu-port-1 = <6>;
+ };
+
};