KERNEL_LOADADDR := 0x00008000
-DEVICE_VARS += KERNEL_SIZE
+define Build/dtb
+ $(call Image/BuildDTB,$(DTS_DIR)/$(DEVICE_DTS).dts,$@.dtb)
+endef
+
+define Build/clearfog-bundle
+ rm -f $@.new
+ $(TAR) -cp --numeric-owner --owner=0 --group=0 --sort=name \
+ $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
+ --file=$@.new -C $(TARGET_DIR)/ .
+ $(TAR) -rp --numeric-owner --owner=0 --group=0 --sort=name \
+ $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
+ --file=$@.new -C $(dir $(IMAGE_KERNEL)) $(notdir $(IMAGE_KERNEL)) $(notdir $(IMAGE_KERNEL).dtb)
+ gzip -9n -c $@.new > $@
+endef
+
+# SD-Card Images:
+# these values are optimized for a 4GB labeled sdcard that actually holds 7744512 sectors of 512 byte
+# MBR: 2048 sectors
+# Partition 1: 32768 sectors
+# Partition 2: 98304 sectors (configurable)
+
+define Build/boot-scr
+ rm -f $@.bootscript
+ mkimage -A arm -O linux -T script -C none -a 0 -e 0 -d boot.script $@.bootscript
+endef
+
+define Build/boot-img
+ rm -f $@.boot
+ mkfs.fat -C $@.boot 16384
+ $(foreach dts,$(DEVICE_DTS), mcopy -i $@.boot $(DTS_DIR)/$(dts).dtb ::$(dts).dtb)
+ mcopy -i $@.boot $(IMAGE_KERNEL) ::zImage
+ mcopy -i $@.boot $@.bootscript ::boot.scr
+endef
+
+define Build/sdcard-img
+ ROOTFS_SIZE=$$(( $(CONFIG_TARGET_ROOTFS_PARTSIZE) * 1024 * 2 )); \
+ ./gen_mvebu_sdcard_img.sh $@ \
+ "$(KDIR)/openwrt-mvebu-clearfog-u-boot-spl.kwb" \
+ c 32768 $@.boot \
+ 83 $$ROOTFS_SIZE $(IMAGE_ROOTFS)
+endef
define Device/Default
PROFILES := Default
define Device/UBI-factory
$(Device/UBI)
+ UBINIZE_OPTS := -E 5
IMAGES += factory.img
- IMAGE/factory.img := append-kernel $$$$(KERNEL_SIZE) | append-ubi | pad-to $$$$(PAGESIZE)
+ IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | pad-to $$$$(PAGESIZE)
endef
define Device/NAND-128K
$(Device/UBI)
- BLOCKSIZE := 128KiB
+ BLOCKSIZE := 128k
PAGESIZE := 2048
SUBPAGESIZE := 512
VID_HDR_OFFSET := 2048
define Device/NAND-256K
$(Device/UBI)
- BLOCKSIZE := 256KiB
+ BLOCKSIZE := 256k
PAGESIZE := 4096
endef
define Device/NAND-512K
$(Device/UBI)
- BLOCKSIZE := 512KiB
+ BLOCKSIZE := 512k
PAGESIZE := 4096
endef
define Device/openblocks-ax3
$(Device/UBI-factory)
DEVICE_DTS := armada-xp-openblocks-ax3-4
- BLOCKSIZE := 128KiB
+ BLOCKSIZE := 128k
PAGESIZE := 1
- IMAGE/factory.img := append-kernel $$$$(KERNEL_SIZE) | append-ubi
+ IMAGE/factory.img := append-kernel | pad-to $$(BLOCKSIZE) | append-ubi
DEVICE_TITLE := Plat'Home OpenBlocks AX3
endef
TARGET_DEVICES += openblocks-ax3
define Device/armada-388-rd
DEVICE_TITLE := Marvell Armada 388 RD (RD-88F6820-AP)
IMAGES := firmware.bin
- IMAGE/firmware.bin := append-kernel 256k | append-rootfs | pad-rootfs
+ IMAGE/firmware.bin := append-kernel | pad-to 256k | append-rootfs | pad-rootfs
endef
TARGET_DEVICES += armada-388-rd
define Device/armada-388-clearfog
KERNEL_INSTALL := 1
+ KERNEL := dtb | kernel-bin
DEVICE_TITLE := SolidRun ClearFog
+ DEVICE_PACKAGES := mkf2fs e2fsprogs swconfig
+ IMAGES := bundle.tar.gz sdcard.img.gz
+ IMAGE/bundle.tar.gz := clearfog-bundle
+ IMAGE/sdcard.img.gz := boot-scr | boot-img | sdcard-img | gzip
+ IMAGE_NAME = $$(IMAGE_PREFIX)-$$(2)
endef
TARGET_DEVICES += armada-388-clearfog