ramips: add support for Tama W06

[openwrt/staging/chunkeey.git] / target / linux / ramips / base-files / etc / board.d / 01_leds

diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 0b0feb41565a4b91a6df951b9bd6c58a32201942..515656f6476f0b2f27578f632235333809fc61e9 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -187,7 +187,8 @@ fonera20n)
        set_usb_led "$boardname:orange:usb"
        set_wifi_led "$boardname:orange:wifi"
        ;;
-gb-pc1)
+gb-pc1|\
+gnubee,gb-pc2)
        ucidef_set_led_switch "lan1" "lan1" "$boardname:green:lan1" "switch0" "0x01"
        ucidef_set_led_switch "lan2" "lan2" "$boardname:green:lan2" "switch0" "0x10"
        ;;
@@ -361,6 +362,10 @@ rt-n14u)
        set_wifi_led "$boardname:blue:air"
        set_usb_led "$boardname:blue:usb"
        ;;
+tama,w06)
+       ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth0"
+       ucidef_set_led_wlan "wlan" "WLAN" "$boardname:green:wlan" "phy0tpt"
+       ;;
 tew-714tru)
        set_usb_led "$boardname:red:usb"
        set_wifi_led "$boardname:green:wifi"
@@ -393,6 +398,12 @@ tplink,c20-v4)
        ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
        ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:green:wlan2g" "wlan0"
        ;;
+tplink,c50-v3)
+       ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
+       ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
+       ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:green:wlan2g" "wlan1"
+       set_wifi_led "$boardname:green:wlan5g"
+       ;;
 tplink,tl-mr3420-v5)
        set_usb_led "$boardname:green:usb"
        set_wifi_led "$boardname:green:wlan"
@@ -491,6 +502,12 @@ zbt-we826-32M)
        set_wifi_led "zbt-we826:green:wifi"
        set_usb_led "zbt-we826:green:usb"
        ;;
+zbtlink,zbt-we1226)
+       set_wifi_led "$boardname:green:wlan"
+       ucidef_set_led_switch "lan1" "LAN1" "$boardname:green:lan1" "switch0" "0x01"
+       ucidef_set_led_switch "lan2" "LAN2" "$boardname:green:lan2" "switch0" "0x02"
+       ucidef_set_led_switch "wan" "WAN" "$boardname:green:wan" "switch0" "0x10"
+       ;;
 zbt-wr8305rt)
        ucidef_set_led_default "power" "power" "$boardname:green:sys" "1"
        set_usb_led "$boardname:green:usb"