ramips: add support for Mercury MAC1200R v2

[openwrt/staging/wigyori.git] / target / linux / ramips / base-files / etc / board.d / 02_network

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 4728c75312ee75842dbda94b41553a7de52fd538..e9df34524b5ea97bdcc50e2b6feeaa32574eb6a1 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -49,6 +49,7 @@ ramips_setup_interfaces()
        microwrt|\
        mpr-a2|\
        ncs601w|\
+       timecloud|\
        w150m|\
        widora-neo|\
        wnce2001|\
@@ -71,12 +72,14 @@ ramips_setup_interfaces()
        dir-615-h1|\
        firewrt|\
        hlk-rm04|\
+       mac1200rv2|\
        miwifi-mini|\
        miwifi-nano|\
        mt7621|\
        mt7628|\
        mzk-750dhp|\
        mzk-w300nh2|\
+       nixcore|\
        oy-0001|\
        pbr-m1|\
        psg1208|\
@@ -113,6 +116,8 @@ ramips_setup_interfaces()
        atp-52b|\
        awm002-evb|\
        awm003-evb|\
+       c20i|\
+       c50|\
        dir-645|\
        dir-860l-b1|\
        f5d8235-v1|\
@@ -164,6 +169,7 @@ ramips_setup_interfaces()
                ;;
        cs-qr10|\
        d105|\
+       dch-m225|\
        hpm|\
        mzk-ex300np|\
        mzk-ex750np|\
@@ -172,6 +178,10 @@ ramips_setup_interfaces()
        wrh-300cr)
                ucidef_set_interface_lan "eth0"
                ;;
+       duzun-dm06)
+               ucidef_add_switch "switch0" \
+                       "1:lan" "0:wan" "6@eth0"
+               ;;
        e1700|\
        mt7620a_mt7530)
                ucidef_add_switch "switch1" \
@@ -184,10 +194,12 @@ ramips_setup_interfaces()
                ;;
        mlwg2|\
        wizard8800|\
-       wl-330n|\
-       wmr-300)
+       wl-330n)
                ucidef_set_interface_lan "eth0.1"
                ;;
+       wmr-300)
+               ucidef_set_interface_lan "eth0"
+               ;;
        mzk-dp150n|\
        vocore)
                ucidef_add_switch "switch0" \
@@ -202,6 +214,7 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "0@eth0"
                ;;
+       tew-714tru|\
        v11st-fe|\
        wzr-agl300nh)
                ucidef_add_switch "switch0" \
@@ -219,6 +232,7 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "1:lan" "2:lan" "0:wan" "6@eth0"
                ;;
+       zbt-ape522ii|\
        zbt-we826|\
        zbt-wr8305rt)
                ucidef_add_switch "switch0" \
@@ -276,10 +290,17 @@ ramips_setup_macs()
                wan_mac=$(mtd_get_mac_binary devdata 7)
                ;;
        cy-swr1100|\
+       dch-m225)
+               lan_mac=$(mtd_get_mac_ascii factory lanmac)
+               ;;
        dir-645)
                lan_mac=$(mtd_get_mac_ascii nvram lanmac)
                wan_mac=$(mtd_get_mac_ascii nvram wanmac)
                ;;
+       dir-860l-b1)
+               lan_mac=$(mtd_get_mac_ascii factory lanmac)
+               wan_mac=$(mtd_get_mac_ascii factory wanmac)
+               ;;
        e1700)
                wan_mac=$(mtd_get_mac_ascii config WAN_MAC_ADDR)
                ;;
@@ -293,6 +314,10 @@ ramips_setup_macs()
                wan_mac=$(mtd_get_mac_binary factory 4)
                lan_mac=$(mtd_get_mac_binary factory 46)
                ;;
+       mac1200rv2)
+               lan_mac=$(mtd_get_mac_binary factory_info 13)
+               wan_mac=$(macaddr_add "$lan_mac" 1)
+               ;;
        m3|\
        m4|\
        x5|\
@@ -313,12 +338,10 @@ ramips_setup_macs()
                wan_mac=$(mtd_get_mac_binary factory 57350)
                ;;
        tew-691gr)
-               lan_mac=$(cat /sys/class/net/eth0/address)
-               wan_mac=$(macaddr_add "$lan_mac" 3)
+               wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 4)" 3)
                ;;
        tew-692gr)
-               lan_mac=$(cat /sys/class/net/eth0/address)
-               wan_mac=$(macaddr_add "$lan_mac" 4)
+               wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 4)" 1)
                ;;
        tiny-ac)
                lan_mac=$(mtd_get_mac_ascii u-boot-env LAN_MAC_ADDR)