/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
+
+#include <dt-bindings/input/input.h>
/ {
compatible = "ALL0256N", "ralink,rt3050-soc";
- model = "Allnet ALL0256N";
-
- palmbus@10000000 {
- gpio0: gpio@600 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "mx25l3205d";
- reg = <0 0>;
- linux,modalias = "m25p80", "mx25l3205d";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
- esw@10110000 {
- ralink,portmap = <0x3f>;
- };
+ model = "Allnet ALL0256N (8M)";
gpio-leds {
compatible = "gpio-leds";
+
rssilow {
label = "all0256n:green:rssilow";
gpios = <&gpio0 14 1>;
};
+
rssimed {
label = "all0256n:green:rssimed";
gpios = <&gpio0 12 1>;
};
+
rssihigh {
label = "all0256n:green:rssihigh";
gpios = <&gpio0 13 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 0 1>;
- linux,code = <0x198>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
};
};
};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+ mediatek,portmap = <0x3f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};