/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
+
+#include <dt-bindings/input/input.h>
/ {
compatible = "DCS-930", "ralink,rt3050-soc";
model = "D-Link DCS-930";
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x400000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
label = "rootfs";
reg = <0x150000 0x2b0000>;
};
-
+
partition {
label = "firmware";
reg = <0x50000 0x3b0000>;
gpio-leds {
compatible = "gpio-leds";
+
wifi {
- label = "d-link:red:alert";
+ label = "dcs-930:red:alert";
gpios = <&gpio0 8 1>;
};
+
power {
- label = "d-link:green:status";
+ label = "dcs-930:green:status";
gpios = <&gpio0 9 1>;
};
+
wps {
- label = "d-link:blue:wps";
+ label = "dcs-930:blue:wps";
gpios = <&gpio0 13 1>;
};
};
wps {
label = "wps";
gpios = <&gpio0 0 1>;
- linux,code = <0x101>;
+ linux,code = <BTN_1>;
};
+
reset {
label = "reset";
gpios = <&gpio0 10 1>;
- linux,code = <0x198>;
+ linux,code = <KEY_RESTART>;
};
};
+};
- esw@10110000 {
- ralink,portmap = <0x2f>;
-
- port@0 {
- compatible = "swconfig,port";
- swconfig,segment = "lan";
- swconfig,portmap = <0 4>;
- };
- port@1 {
- compatible = "swconfig,port";
- swconfig,segment = "lan";
- swconfig,portmap = <1 3>;
- };
- port@2 {
- compatible = "swconfig,port";
- swconfig,segment = "lan";
- swconfig,portmap = <2 2>;
- };
- port@3 {
- compatible = "swconfig,port";
- swconfig,segment = "lan";
- swconfig,portmap = <3 1>;
- };
- port@4 {
- compatible = "swconfig,port";
- swconfig,segment = "wan";
- swconfig,portmap = <4 0>;
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
+ ralink,function = "gpio";
};
};
+};
- otg@101c0000 {
- status = "okay";
- };
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
};