/dts-v1/;
-/include/ "mt7620a.dtsi"
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/input/input.h>
/ {
compatible = "linksys,e1700", "ralink,mt7620a-soc";
model = "Linksys E1700";
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "mx25l6405d";
- reg = <0 0>;
- linux,modalias = "m25p80", "mx25l6405d";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "config";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- status = "okay";
-
- mtd-mac-address = <&factory 0x28>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
-
- port@5 {
- status = "okay";
- ralink,fixed-link = <1000 1 1 1>;
- phy-mode = "rgmii";
- };
-
- mdio-bus {
- status = "okay";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- phy-mode = "rgmii";
- };
- phy1: ethernet-phy@1 {
- reg = <1>;
- phy-mode = "rgmii";
- };
- phy2: ethernet-phy@2 {
- reg = <2>;
- phy-mode = "rgmii";
- };
- phy3: ethernet-phy@3 {
- reg = <3>;
- phy-mode = "rgmii";
- };
- phy4: ethernet-phy@4 {
- reg = <4>;
- phy-mode = "rgmii";
- };
- phy1f: ethernet-phy@1f {
- reg = <0x1f>;
- phy-mode = "rgmii";
- };
- };
- };
-
- gsw@10110000 {
- ralink,port4 = "gmac";
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 1 0>;
- linux,code = <0x198>;
+ linux,code = <KEY_RESTART>;
};
+
wps {
label = "wps";
gpios = <&gpio0 2 0>;
- linux,code = <0x211>;
+ linux,code = <KEY_WPS_BUTTON>;
};
};
gpio-leds {
compatible = "gpio-leds";
+
power {
- label = "linksys:green:power";
+ label = "e1700:green:power";
gpios = <&gpio0 10 1>;
};
+
wan {
- label = "linksys:green:wps";
+ label = "e1700:green:wps";
gpios = <&gpio0 12 1>;
};
};
};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "config";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ status = "okay";
+ mtd-mac-address = <&factory 0x28>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+
+ port@5 {
+ status = "okay";
+ mediatek,fixed-link = <1000 1 1 1>;
+ phy-mode = "rgmii";
+ };
+
+ mdio-bus {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "rgmii";
+ };
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ phy-mode = "rgmii";
+ };
+
+ phy2: ethernet-phy@2 {
+ reg = <2>;
+ phy-mode = "rgmii";
+ };
+
+ phy3: ethernet-phy@3 {
+ reg = <3>;
+ phy-mode = "rgmii";
+ };
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "rgmii";
+ };
+
+ phy1f: ethernet-phy@1f {
+ reg = <0x1f>;
+ phy-mode = "rgmii";
+ };
+ };
+};
+
+&gsw {
+ mediatek,port4 = "gmac";
+ mediatek,mt7530 = <1>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};