/dts-v1/;
-/include/ "rt5350.dtsi"
+#include "rt5350.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
- compatible = "F7C027", "ralink,rt5350-soc";
+ compatible = "belkin,f7c027", "ralink,rt5350-soc";
model = "Belkin F7C027";
- palmbus@10000000 {
- sysc@0 {
- ralink,pinmux = "spi", "uartlite", "jtag", "sdram";
- ralink,uartmux = "gpio";
- ralink,wdtmux = <1>;
- };
-
- gpio0: gpio@600 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "mx25l12805d";
- reg = <0 0>;
- linux,modalias = "m25p80", "mx25l12805d";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x770000>;
- };
-
- partition@7c0000 {
- label = "firmware2";
- reg = <0x7c0000 0x770000>;
- };
-
- partition@f30000 {
- label = "belkin_settings";
- reg = <0xf30000 0xa0000>;
- };
-
- partition@fd0000 {
- label = "unknown";
- reg = <0xfd0000 0x10000>;
- };
-
- partition@fe0000 {
- label = "nvram";
- reg = <0xfe0000 0x10000>;
- };
-
- partition@ff0000 {
- label = "user_factory";
- reg = <0xff0000 0x10000>;
- };
- };
- };
- };
-
-
- wmac@10180000 {
- status = "okay";
- };
-
gpio-leds {
compatible = "gpio-leds";
+
status {
- label = "belkin:blue:status";
- gpios = <&gpio0 7 1>;
+ label = "f7c027:blue:status";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
};
+
power {
- label = "belkin:blue:power";
- gpios = <&gpio0 9 1>;
+ label = "f7c027:blue:power";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
};
+
orange {
- label = "belkin:orange:status";
- gpios = <&gpio0 11 1>;
+ label = "f7c027:orange:status";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
};
+
relay {
- label = "belkin:device:relay";
- gpios = <&gpio0 13 0>;
+ label = "f7c027:device:relay";
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
};
};
+
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
top {
- label = "top";
- gpios = <&gpio0 10 1>;
- linux,code = <0x198>;
+ label = "restore";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
};
+
power {
label = "power";
- gpios = <&gpio0 12 1>;
- linux,code = <0x100>;
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
};
+
sensor {
label = "sensor";
- gpios = <&gpio0 14 1>;
- linux,code = <0x101>;
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x770000>;
+ };
+
+ partition@7c0000 {
+ label = "firmware2";
+ reg = <0x7c0000 0x770000>;
+ };
+
+ partition@f30000 {
+ label = "belkin_settings";
+ reg = <0xf30000 0xa0000>;
+ };
+
+ partition@fd0000 {
+ label = "unknown";
+ reg = <0xfd0000 0x10000>;
+ };
+
+ partition@fe0000 {
+ label = "nvram";
+ reg = <0xfe0000 0x10000>;
+ };
+
+ partition@ff0000 {
+ label = "user_factory";
+ reg = <0xff0000 0x10000>;
+ };
+ };
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
};
};
};