/dts-v1/;
-/include/ "rt5350.dtsi"
+#include "rt5350.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
- compatible = "M2M", "ralink,rt5350-soc";
+ compatible = "intenso,memory2move", "ralink,rt5350-soc";
model = "Intenso Memory 2 Move";
- chosen {
- bootargs = "console=ttyS1,57600n8 root=/dev/mtdblock5";
- };
-
- palmbus@10000000 {
- uart@500 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "mx25l6405d";
- reg = <0 0>;
- linux,modalias = "m25p80", "mx25l6405d";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "Bootloader";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "Config";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "Factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
+ aliases {
+ led-boot = &led_wifi;
+ led-failsafe = &led_wifi;
+ led-running = &led_wifi;
+ led-upgrade = &led_wifi;
};
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "uartf";
- ralink,function = "gpio";
- };
- };
+ chosen {
+ bootargs = "console=ttyS0,57600n8 root=/dev/mtdblock5";
};
gpio-leds {
compatible = "gpio-leds";
- wifi {
+
+ led_wifi: wifi {
label = "m2m:blue:wifi";
- gpios = <&gpio0 7 1>;
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
};
+
wan {
label = "m2m:green:wan";
- gpios = <&gpio0 12 1>;
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
};
};
gpio-keys-polled {
- gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <20>;
- power {
- label = "power";
- gpios = <&gpio0 1 1>;
- linux,code = <0x116>;
+
+ power {
+ label = "power";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "Bootloader";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "Config";
+ reg = <0x30000 0x10000>;
+ read-only;
};
- reset {
- label = "reset";
- gpios = <&gpio0 10 1>;
- linux,code = <0x198>;
+
+ factory: partition@40000 {
+ label = "Factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
};
};
};
+};
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x28>;
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf";
+ ralink,function = "gpio";
+ };
};
+};
- esw@10110000 {
- ralink,portmap = <0x2f>;
- };
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+};
- ehci@101c0000 {
- status = "okay";
- };
+&esw {
+ mediatek,portmap = <0x2f>;
+};
- ohci@101c1000 {
- status = "okay";
- };
+&ehci {
+ status = "okay";
+};
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0x0>;
- };
+&ohci {
+ status = "okay";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0x0>;
};