/dts-v1/;
-/include/ "rt5350.dtsi"
+#include "rt5350.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
- compatible = "M3", "ralink,rt5350-soc";
+ compatible = "poray,m3", "ralink,rt5350-soc";
model = "Poray M3";
- palmbus@10000000 {
- sysc@0 {
- ralink,pinmux = "i2c", "spi", "uartlite", "mdio", "sdram", "rgmii";
- ralink,gpiomux = "jtag";
- ralink,uartmux = "gpio";
- ralink,wdtmux = <1>;
- };
-
- gpio0: gpio@600 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "w25q32";
- reg = <0 0>;
- linux,modalias = "m25p80", "w25q32";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
- };
-
- ethernet@10100000 {
- status = "okay";
- };
-
- esw@10110000 {
- status = "okay";
- ralink,portmap = <0x2f>;
- ralink,led_polarity = <1>;
- };
-
gpio-leds {
compatible = "gpio-leds";
+
status {
label = "m3:blue:status";
- gpios = <&gpio0 9 1>;
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
};
};
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
- gpios = <&gpio0 10 1>;
- linux,code = <0x198>;
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
};
+
mode {
label = "mode";
- gpios = <&gpio0 17 1>;
- linux,code = <0x100>;
- linux,input-type = <5>;
+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
};
};
+};
- wmac@10180000 {
- status = "okay";
- ralink,mtd-eeprom = <&factory 0>;
- ralink,led-polarity = <1>;
- };
+&spi0 {
+ status = "okay";
- ehci@101c0000 {
- status = "okay";
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
};
+};
- ohci@101c1000 {
- status = "okay";
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
};
};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+ mediatek,led_polarity = <1>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+ ralink,led-polarity = <1>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};