/dts-v1/;
-/include/ "mt7620a.dtsi"
+#include "mt7620a.dtsi"
/ {
compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
model = "Ralink MT7620a + MT7610e evaluation board";
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "en25q64";
- reg = <0 0>;
- linux,modalias = "m25p80", "en25q64";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
+ gpio-keys-polled {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ s2 {
+ label = "S2";
+ gpios = <&gpio0 1 1>;
+ linux,code = <0x100>;
};
- };
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "mdio", "i2c", "uartf";
- ralink,function = "gpio";
- };
+ s3 {
+ label = "S3";
+ gpios = <&gpio0 2 1>;
+ linux,code = <0x101>;
};
};
+};
- ethernet@10100000 {
- status = "okay";
-
- port@4 {
- compatible = "ralink,mt7620a-gsw-port", "ralink,eth-port";
- reg = <4>;
- phy-mode = "rgmii";
- phy-handle = <&phy4>;
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ linux,modalias = "m25p80", "en25q64";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
};
- port@5 {
- compatible = "ralink,mt7620a-gsw-port", "ralink,eth-port";
- reg = <5>;
- phy-mode = "rgmii";
- phy-handle = <&phy5>;
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
};
- mdio-bus {
- status = "okay";
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
- phy4: ethernet-phy@4 {
- reg = <4>;
- phy-mode = "rgmii";
- };
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+};
- phy5: ethernet-phy@5 {
- reg = <5>;
- phy-mode = "rgmii";
- };
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf";
+ ralink,function = "gpio";
};
};
+};
- gsw@10110000 {
- ralink,port4 = "gmac";
+ðernet {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+ mediatek,portmap = "llllw";
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_pins>;
+ port@4 {
+ status = "okay";
+ phy-mode = "rgmii";
+ phy-handle = <&phy4>;
};
- sdhci@10130000 {
+ port@5 {
status = "okay";
+ phy-mode = "rgmii";
+ phy-handle = <&phy5>;
};
- pcie@10140000 {
+ mdio-bus {
status = "okay";
- };
- gpio-keys-polled {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <20>;
- s2 {
- label = "S2";
- gpios = <&gpio0 1 1>;
- linux,code = <0x100>;
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "rgmii";
};
- s3 {
- label = "S3";
- gpios = <&gpio0 2 1>;
- linux,code = <0x101>;
+
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ phy-mode = "rgmii";
};
};
};
+
+&gsw {
+ mediatek,port4 = "gmac";
+};
+
+&sdhci {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};