};
palmbus@10000000 {
- sysc@0 {
- ralink,pinmux = "uartlite", "spi";
- ralink,gpiomux = "i2c", "jtag";
- ralink,uartmux = "gpio";
- ralink,wdtmux = <1>;
- };
-
- timer@100 {
- status = "okay";
- };
-
- gpio0: gpio@600 {
- status = "okay";
- };
-
spi@b00 {
status = "okay";
compatible = "macronix,mx25l12805d";
spi-max-frequency = <25000000>;
reg = <0>;
-
#address-cells = <1>;
#size-cells = <1>;
read-only;
};
- partition@40000 {
+ factory: partition@40000 {
reg = <0x00040000 0x00010000>;
label = "factory";
read-only;
};
};
- ethernet@10100000 {
- status = "okay";
+ pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+ };
+ ethernet@10100000 {
phy-handle = <&phy0>;
phy-mode = "rgmii";
+ mtd-mac-address = <&factory 0x28>;
mdio-bus {
status = "okay";
};
wmac@10180000 {
- status = "okay";
+ ralink,mtd-eeprom = <&factory 0>;
};
ehci@101c0000 {
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
+
reset {
label = "reset";
gpios = <&gpio0 14 0>;
label = "emb:orange:power";
gpios = <&gpio0 7 1>;
};
+
status {
label = "emb:green:status";
gpios = <&gpio0 21 1>;
};
+
eth {
label = "emb:green:eth";
gpios = <&gpio0 20 1>;
};
+
eth2 {
label = "emb:red:eth";
gpios = <&gpio0 18 1>;
};
+
wifi {
label = "emb:green:wifi";
gpios = <&gpio0 17 1>;
};
+
wifi2 {
label = "emb:red:wifi";
gpios = <&gpio0 19 1>;
};
};
- /* gpio 12 and 13 handle the OC input */
- usb0: gpio-regulator {
- compatible = "regulator-gpio";
-
- regulator-name = "usb0-power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-boot-on;
-
- enable-active-high;
- enable-gpio = <&gpio0 2 0>;
- };
-
- usb1: gpio-regulator {
- compatible = "regulator-gpio";
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+ /* gpio 12 and 13 handle the OC input */
- regulator-name = "usb1-power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-boot-on;
+ usb0 {
+ gpio-export,name = "usb0";
+ gpio-export,output = <1>;
+ gpios = <&gpio0 2 0>;
+ };
- enable-active-high;
- enable-gpio = <&gpio0 1 0>;
+ usb1 {
+ gpio-export,name = "usb1";
+ gpio-export,output = <1>;
+ gpios = <&gpio0 1 0>;
+ };
};
};