ramips: add support for ALFA Network AC1200RM

[openwrt/staging/wigyori.git] / target / linux / ramips / dts / TEW-692GR.dts

diff --git a/target/linux/ramips/dts/TEW-692GR.dts b/target/linux/ramips/dts/TEW-692GR.dts
index 5bba8a50b8d5a09d6f58da260436d5ea213edc30..a2e853a0ae42810b643b909fa260a9f728d3c3b2 100644 (file)
--- a/target/linux/ramips/dts/TEW-692GR.dts
+++ b/target/linux/ramips/dts/TEW-692GR.dts
@@ -2,8 +2,11 @@
 
 #include "rt3883.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
 / {
-       compatible = "TEW-692GR", "ralink,rt3883-soc";
+       compatible = "trendnet,tew-692gr", "ralink,rt3883-soc";
        model = "TRENDnet TEW-692GR";
 
        nor-flash@1c000000 {
@@ -45,14 +48,14 @@
 
                reset {
                        label = "reset";
-                       gpios = <&gpio0 10 1>;
-                       linux,code = <0x198>;
+                       gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
                };
 
                wps {
                        label = "wps";
-                       gpios = <&gpio1 2 1>;
-                       linux,code = <0x211>;
+                       gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
                };
        };
 
@@ -61,12 +64,12 @@
 
                wps {
                        label = "tew-692gr:orange:wps";
-                       gpios = <&gpio0 9 1>;
+                       gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
                };
 
                wps2 {
                        label = "tew-692gr:green:wps";
-                       gpios = <&gpio1 4 1>;
+                       gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
                };
        };
 };
@@ -86,7 +89,7 @@
 
 &ethernet {
        status = "okay";
-       mtd-mac-address = <&factory 0x28>;
+       mtd-mac-address = <&factory 0x4>;
 
        port@0 {
                phy-handle = <&phy0>;
@@ -98,6 +101,19 @@
 
                phy0: ethernet-phy@0 {
                        reg = <0>;
+                       phy-mode = "rgmii";
+
+                       qca,ar8327-initvals = <
+                               0x04 0x07600000 /* PORT0 PAD MODE CTRL */
+                               0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
+                               0x10 0x40000000 /* Power-on Strapping: 176-pin interface configuration */
+                               0x50 0xc437c437 /* LED Control Register 0 */
+                               0x54 0xc337c337 /* LED Control Register 1 */
+                               0x58 0x00000000 /* LED Control Register 2 */
+                               0x5c 0x03ffff00 /* LED Control Register 3 */
+                               0x7c 0x0000007e /* PORT0_STATUS */
+                               0x94 0x0000007e /* PORT6 STATUS */
+                       >;
                };
        };
 };
@@ -117,10 +133,20 @@
        host-bridge {
                pci-bridge@1 {
                        status = "okay";
+
+                       wifi@0,0 {
+                               compatible = "pci0,0";
+                               reg = < 0x10000 0 0 0 0 >;
+                               ralink,2ghz = <0>;
+                       };
                };
        };
 };
 
 &wmac {
+       status = "okay";
+       ralink,mtd-eeprom = <&factory 0x0>;
        ralink,5ghz = <0>;
+       mtd-mac-address = <&factory 0x4>;
+       mtd-mac-address-increment = <3>;
 };