/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
-/ {
- compatible = "3G300M", "ralink,rt3050-soc";
- model = "Tenda 3G300M";
-
- memorydetect {
- ralink,memory = <0x0 0x200000 0x4000000>;
- };
-
- palmbus@10000000 {
- sysc@0 {
- ralink,pinmux = "i2c", "spi", "uartlite", "mdio", "sdram", "rgmii", "jtag";
- ralink,uartmux = "gpio";
- ralink,wdtmux = <1>;
- };
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
- gpio0: gpio@600 {
- status = "okay";
- };
+/ {
+ compatible = "tenda,w150m", "ralink,rt3050-soc";
+ model = "Tenda W150M";
+
+ aliases {
+ led-boot = &led_ap;
+ led-failsafe = &led_ap;
+ led-running = &led_ap;
+ led-upgrade = &led_ap;
};
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
- #address-cells = <1>;
- #size-cells = <1>;
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x3c8000>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x3c8000>;
+ };
};
};
gpio-leds {
compatible = "gpio-leds";
+
3grouter {
- label = "tenda:blue:3grouter";
- gpios = <&gpio0 11 1>;
+ label = "w150m:blue:3grouter";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
};
- ap {
- label = "tenda:blue:ap";
- gpios = <&gpio0 12 1>;
+
+ led_ap: ap {
+ label = "w150m:blue:ap";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
};
+
wisprouter {
- label = "tenda:blue:wisprouter";
- gpios = <&gpio0 9 1>;
+ label = "w150m:blue:wisprouter";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
};
+
wirelessrouter {
- label = "tenda:blue:wirelessrouter";
- gpios = <&gpio0 13 1>;
+ label = "w150m:blue:wirelessrouter";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
};
+
3g {
- label = "tenda:blue:3g";
- gpios = <&gpio0 7 1>;
+ label = "w150m:blue:3g";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
};
+
wpsreset {
- label = "tenda:blue:wpsreset";
- gpios = <&gpio0 14 1>;
+ label = "w150m:blue:wpsreset";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
- gpios = <&gpio0 0 1>;
- linux,code = <0x198>;
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
};
+
mode {
label = "mode";
- gpios = <&gpio0 10 1>;
- linux,code = <0x100>;
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
};
};
+};
- ethernet@10100000 {
- status = "okay";
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
};
+};
- esw@10110000 {
- status = "okay";
- ralink,portmap = <0x2f>;
- };
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
- wmac@10180000 {
- status = "okay";
- };
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
};