ramips: fix firmware splitter for edimax based boards

[openwrt/staging/wigyori.git] / target / linux / ramips / dts / WL-330N.dts

diff --git a/target/linux/ramips/dts/WL-330N.dts b/target/linux/ramips/dts/WL-330N.dts
index 632d9607ac5119ec9f972853eb0df8a2a25034ac..e747d6097681e15138398b97e012b9cdbce0e9e9 100644 (file)
--- a/target/linux/ramips/dts/WL-330N.dts
+++ b/target/linux/ramips/dts/WL-330N.dts
@@ -1,68 +1,19 @@
 /dts-v1/;
 
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
-       compatible = "WL-330N", "ralink,rt3050-soc";
+       compatible = "asus,wl-330n", "ralink,rt3050-soc";
        model = "Asus WL-330N";
 
-       palmbus@10000000 {
-               spi@b00 {
-                       status = "okay";
-
-                       m25p80@0 {
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-                               compatible = "jedec,spi-nor";
-                               reg = <0 0>;
-                               linux,modalias = "m25p80", "mx25l3205d";
-                               spi-max-frequency = <10000000>;
-
-                               partition@0 {
-                                       label = "u-boot";
-                                       reg = <0x0 0x30000>;
-                                       read-only;
-                               };
-
-                               partition@30000 {
-                                       label = "u-boot-env";
-                                       reg = <0x30000 0x10000>;
-                                       read-only;
-                               };
-
-                               factory: partition@40000 {
-                                       label = "factory";
-                                       reg = <0x40000 0x10000>;
-                                       read-only;
-                               };
-
-                               partition@50000 {
-                                       label = "firmware";
-                                       reg = <0x50000 0x3b0000>;
-                               };
-                       };
-               };
-       };
-
-       pinctrl {
-               state_default: pinctrl0 {
-                       gpio {
-                               ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
-                               ralink,function = "gpio";
-                       };
-               };
-       };
-
-       ethernet@10100000 {
-               mtd-mac-address = <&factory 0x4>;
-       };
-
-       esw@10110000 {
-               mediatek,portmap = <0x3e>;
-       };
-
-       wmac@10180000 {
-               ralink,mtd-eeprom = <&factory 0>;
+       aliases {
+               led-boot = &led_power;
+               led-failsafe = &led_power;
+               led-running = &led_power;
+               led-upgrade = &led_power;
        };
 
        gpio-leds {
@@ -70,31 +21,90 @@
 
                link {
                        label = "wl-330n:blue:link";
-                       gpios = <&gpio0 9 1>;
+                       gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
                };
 
-               power {
+               led_power: power {
                        label = "wl-330n:blue:power";
-                       gpios = <&gpio0 11 1>;
+                       gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
                };
        };
 
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
                poll-interval = <20>;
 
                reset {
                        label = "reset";
-                       gpios = <&gpio0 10 1>;
-                       linux,code = <0x198>;
+                       gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
                };
 
                wps {
                        label = "wps";
-                       gpios = <&gpio0 0 1>;
-                       linux,code = <0x198>;
+                       gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
                };
        };
 };
+
+&spi0 {
+       status = "okay";
+
+       m25p80@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <10000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x50000 0x3b0000>;
+                       };
+               };
+       };
+};
+
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+                       ralink,function = "gpio";
+               };
+       };
+};
+
+&ethernet {
+       mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+       mediatek,portmap = <0x3e>;
+};
+
+&wmac {
+       ralink,mtd-eeprom = <&factory 0>;
+};