#include "mt7621.dtsi"
+#include <dt-bindings/input/input.h>
+
/ {
- compatible = "ralink,mt7621-eval-board", "ralink,mt7621-soc";
model = "Buffalo WSR-600DHP";
memory@0 {
power {
label = "power";
gpios = <&gpio0 8 1>;
- linux,code = <0x74>;
+ linux,code = <KEY_POWER>;
};
reset {
label = "reset";
gpios = <&gpio0 11 1>;
- linux,code = <0x198>;
+ linux,code = <KEY_RESTART>;
};
aoss {
label = "aoss";
gpios = <&gpio0 18 1>;
- linux,code = <0x211>;
+ linux,code = <KEY_WPS_BUTTON>;
};
auto {
label = "mode";
gpios = <&gpio0 7 0>;
- linux,code = <0x100>;
- linux,input-type = <5>; /* EV_SW */
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
};
ap {
label = "ap";
gpios = <&gpio0 6 0>;
- linux,code = <0x100>;
- linux,input-type = <5>; /* EV_SW */
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
};
router {
label = "router";
gpios = <&gpio0 10 0>;
- linux,code = <0x100>;
- linux,input-type = <5>; /* EV_SW */
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
};
};
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
- linux,modalias = "m25p80";
spi-max-frequency = <10000000>;
+ m25p,chunked-io = <32>;
partition@0 {
label = "u-boot";
};
};
};
+
+&pcie {
+ status = "okay";
+
+ pcie0 {
+ rt5592@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ ralink,mtd-eeprom = <&factory 0x8000>;
+ };
+ };
+
+ pcie1 {
+ mt76@1,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x0000>;
+ mediatek,5ghz = <0>;
+ };
+ };
+};
+
+&xhci {
+ status = "disabled";
+};