ramips: rework network settings for HC5861

[openwrt/staging/wigyori.git] / target / linux / ramips / dts / ZBT-APE522II.dts

diff --git a/target/linux/ramips/dts/ZBT-APE522II.dts b/target/linux/ramips/dts/ZBT-APE522II.dts
index f57012997770e80b5a71cb816291dc8704174f73..70ad0f0b58555a2ccd27b90d758976a948863fb3 100644 (file)
--- a/target/linux/ramips/dts/ZBT-APE522II.dts
+++ b/target/linux/ramips/dts/ZBT-APE522II.dts
@@ -2,6 +2,7 @@
 
 #include "mt7620a.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
 / {
@@ -12,44 +13,42 @@
                bootargs = "console=ttyS0,115200";
        };
 
-       gpio-leds {
+       leds {
                compatible = "gpio-leds";
 
                sys1 {
                        label = "zbt-ape522ii:green:sys1";
-                       gpios = <&gpio0 11 1>;
+                       gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
                };
 
                sys2 {
                        label = "zbt-ape522ii:green:sys2";
-                       gpios = <&gpio0 12 1>;
+                       gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
                };
 
                sys3 {
                        label = "zbt-ape522ii:green:sys3";
-                       gpios = <&gpio0 9 1>;
+                       gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
                };
 
                sys4 {
                        label = "zbt-ape522ii:green:sys4";
-                       gpios = <&gpio0 14 1>;
+                       gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
                };
 
                wlan2g4 {
                        label = "zbt-ape522ii:green:wlan2g4";
-                       gpios = <&gpio3 0 1>;
+                       gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
                };
        };
 
-       gpio-keys-polled {
+       keys {
                compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
                poll-interval = <20>;
 
                reset {
                        label = "reset";
-                       gpios = <&gpio0 2 0>;
+                       gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
                        linux,code = <KEY_RESTART>;
                };
        };
@@ -75,33 +74,37 @@
        status = "okay";
 
        m25p80@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
                compatible = "jedec,spi-nor";
                reg = <0>;
-               linux,modalias = "m25p80", "w25q64";
                spi-max-frequency = <10000000>;
 
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0 0x30000>;
-               };
-
-               partition@30000 {
-                       label = "u-boot-env";
-                       reg = <0x30000 0x10000>;
-                       read-only;
-               };
-
-               factory: partition@40000 {
-                       label = "factory";
-                       reg = <0x40000 0x10000>;
-                       read-only;
-               };
-
-               partition@50000 {
-                       label = "firmware";
-                       reg = <0x50000 0xf80000>;
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x50000 0xf80000>;
+                       };
                };
        };
 };
@@ -115,18 +118,19 @@
 
 &wmac {
        ralink,mtd-eeprom = <&factory 0>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pa_pins>;
 };
 
 &pcie {
        status = "okay";
+};
 
-       pcie-bridge {
-               mt76@0,0 {
-                       reg = <0x0000 0 0 0 0>;
-                       device_type = "pci";
-                       mediatek,mtd-eeprom = <&factory 0x8000>;
-                       mediatek,2ghz = <0>;
-               };
+&pcie0 {
+       mt76@0,0 {
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&factory 0x8000>;
+               ieee80211-freq-limit = <5000000 6000000>;
        };
 };
 
@@ -136,10 +140,5 @@
                        ralink,group = "wled", "i2c", "uartf", "wdt";
                        ralink,function = "gpio";
                };
-
-               pa {
-                       ralink,group = "pa";
-                       ralink,function = "pa";
-               };
        };
 };