ramips: replace remaining instances of ralink, port-map

[openwrt/staging/yousong.git] / target / linux / ramips / dts / ZBT-WG3526.dtsi

diff --git a/target/linux/ramips/dts/ZBT-WG3526.dtsi b/target/linux/ramips/dts/ZBT-WG3526.dtsi
index 6e82d253989ae73d40f8d4c81237271f038eed02..582e42083920c465588f14e59e10eafe735640fb 100644 (file)
--- a/target/linux/ramips/dts/ZBT-WG3526.dtsi
+++ b/target/linux/ramips/dts/ZBT-WG3526.dtsi
@@ -1,5 +1,6 @@
 #include "mt7621.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
 / {
@@ -26,7 +27,7 @@
 
                reset {
                        label = "reset";
-                       gpios = <&gpio0 18 1>;
+                       gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_RESTART>;
                };
        };
@@ -52,8 +53,8 @@
                #size-cells = <1>;
                compatible = "jedec,spi-nor";
                reg = <0>;
-               linux,modalias = "m25p80";
                spi-max-frequency = <10000000>;
+               m25p,chunked-io = <32>;
 
                partition@0 {
                        label = "u-boot";
@@ -83,20 +84,19 @@
        status = "okay";
 
        pcie0 {
-               mt76@0,0 {
+               wifi@14c3,7603 {
+                       compatible = "pci14c3,7603";
                        reg = <0x0000 0 0 0 0>;
-                       device_type = "pci";
                        mediatek,mtd-eeprom = <&factory 0x0000>;
-                       mediatek,5ghz = <0>;
                };
        };
 
        pcie1 {
-               mt76@1,0 {
+               wifi@14c3,7662 {
+                       compatible = "pci14c3,7662";
                        reg = <0x0000 0 0 0 0>;
-                       device_type = "pci";
                        mediatek,mtd-eeprom = <&factory 0x8000>;
-                       mediatek,2ghz = <0>;
+                       ieee80211-freq-limit = <5000000 6000000>;
                };
        };
 };