ramips: convert to new LED color/function format where possible
[openwrt/staging/jow.git] / target / linux / ramips / dts / mt7620a_alfa-network_r36m-e4g.dts
index 0991ae844751e744353e3d8525e2f637e3553f40..e8276fe717569e3b03393639d4cd069f28f124d1 100644 (file)
@@ -4,6 +4,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 
 / {
        compatible = "alfa-network,r36m-e4g", "ralink,mt7620a-soc";
@@ -86,7 +87,8 @@
                };
 
                lan {
-                       label = "green:lan";
+                       function = LED_FUNCTION_LAN;
+                       color = <LED_COLOR_ID_GREEN>;
                        gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
                };
 
                };
 
                wan {
-                       label = "green:wan";
+                       function = LED_FUNCTION_WAN;
+                       color = <LED_COLOR_ID_GREEN>;
                        gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
                };
 
                wlan {
-                       label = "orange:wlan";
+                       function = LED_FUNCTION_WLAN;
+                       color = <LED_COLOR_ID_ORANGE>;
                        gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
                        linux,default-trigger = "phy0radio";
                };
 };
 
 &ethernet {
-       mtd-mac-address = <&factory 0x28>;
+       nvmem-cells = <&macaddr_factory_28>;
+       nvmem-cell-names = "mac-address";
 };
 
 &gpio1 {
                                label = "factory";
                                reg = <0x40000 0x10000>;
                                read-only;
+
+                               nvmem-layout {
+                                       compatible = "fixed-layout";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       eeprom_factory_0: eeprom@0 {
+                                               reg = <0x0 0x200>;
+                                       };
+
+                                       macaddr_factory_28: macaddr@28 {
+                                               reg = <0x28 0x6>;
+                                       };
+                               };
                        };
 
                        partition@50000 {
 };
 
 &wmac {
-       ralink,mtd-eeprom = <&factory 0x0>;
+       nvmem-cells = <&eeprom_factory_0>;
+       nvmem-cell-names = "eeprom";
 };