ramips: mt7620a: use mac-base
[openwrt/staging/hauke.git] / target / linux / ramips / dts / mt7620a_dlink_dwr-118-a2.dts
index 296890ebd61adca8baf95feff7ed9362714359e4..5f11b73ad9e40d739fdb0758c37f059bd8e5e02f 100644 (file)
@@ -2,6 +2,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/mtd/partitions/uimage.h>
 
 / {
        compatible = "dlink,dwr-118-a2", "ralink,mt7620a-soc";
                compatible = "gpio-leds";
 
                wan {
-                       label = "dwr-118-a2:green:wan";
+                       label = "green:wan";
                        gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
                };
 
                led_internet: internet {
-                       label = "dwr-118-a2:green:internet";
+                       label = "green:internet";
                        gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
                };
 
                lan {
-                       label = "dwr-118-a2:green:lan";
+                       label = "green:lan";
                        gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
                };
 
                wlan2g {
-                       label = "dwr-118-a2:green:wlan2g";
+                       label = "green:wlan2g";
                        gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
                };
 
                usb {
-                       label = "dwr-118-a2:green:usb";
+                       label = "green:usb";
                        gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
                        trigger-sources = <&ohci_port1>, <&ehci_port1>;
                        linux,default-trigger = "usbport";
                        };
 
                        partition@10000 {
-                               compatible = "amit,jimage";
+                               compatible = "openwrt,uimage", "denx,uimage";
+                               openwrt,ih-magic = <IH_MAGIC_OKLI>;
+                               openwrt,offset = <0x10000>;
                                label = "firmware";
                                reg = <0x10000 0xfe0000>;
                        };
                                label = "config";
                                reg = <0xff0000 0x10000>;
                                read-only;
+
+                               nvmem-layout {
+                                       compatible = "fixed-layout";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       macaddr_config_e4a8: macaddr@e4a8 {
+                                               compatible = "mac-base";
+                                               reg = <0xe4a8 0x6>;
+                                               #nvmem-cell-cells = <1>;
+                                       };
+                               };
                        };
                };
        };
        wifi@0,0 {
                reg = <0x0000 0 0 0 0>;
                ieee80211-freq-limit = <5000000 6000000>;
-               mtd-mac-address = <&config 0xe4a8>;
-               mtd-mac-address-increment = <(2)>;
+               nvmem-cells = <&macaddr_config_e4a8 2>;
+               nvmem-cell-names = "mac-address";
 
                led {
                        led-sources = <2>;
 };
 
 &gsw {
-       mediatek,port4 = "gmac";
-       mediatek,ephy-base-address = /bits/ 16 < 2 >;
+       mediatek,port4-gmac;
+       mediatek,ephy-base = /bits/ 8 <2>;
 };