-/dts-v1/;
-
#include "mt7620a.dtsi"
#include <dt-bindings/gpio/gpio.h>
bootargs = "console=ttyS0,115200";
};
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uartf", "wled", "ephy", "spi refclk";
- ralink,function = "gpio";
- };
- };
- };
-
leds {
compatible = "gpio-leds";
lan {
- label = "archer-c2-v1:green:lan";
+ label = "green:lan";
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
};
usb {
- label = "archer-c2-v1:green:usb";
+ label = "green:usb";
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
trigger-sources = <&ohci_port1>, <&ehci_port1>;
linux,default-trigger = "usbport";
};
led_wps: wps {
- label = "archer-c2-v1:green:wps";
+ label = "green:wps";
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
wan {
- label = "archer-c2-v1:green:wan";
+ label = "green:wan";
gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
};
wlan {
- label = "archer-c2-v1:green:wlan";
+ label = "green:wlan";
gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
};
};
&spi0 {
status = "okay";
- m25p80@0 {
+ flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
- spi-max-frequency = <10000000>;
+ spi-max-frequency = <30000000>;
partitions {
compatible = "fixed-partitions";
};
ðernet {
- status = "okay";
- mtd-mac-address = <&rom 0xf100>;
pinctrl-names = "default";
pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+ mtd-mac-address = <&rom 0xf100>;
+
port@5 {
status = "okay";
mediatek,fixed-link = <1000 1 1 1>;
};
};
-
&gpio1 {
status = "okay";
};
status = "okay";
};
+&state_default {
+ gpio {
+ groups = "i2c", "uartf", "wled", "ephy", "spi refclk";
+ function = "gpio";
+ };
+};
+
&wmac {
- ralink,mtd-eeprom = <&radio 0>;
+ ralink,mtd-eeprom = <&radio 0x0>;
mtd-mac-address = <&rom 0xf100>;
};
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&radio 0x8000>;
+ mtd-mac-address = <&rom 0xf100>;
+ mac-address-increment = <(-1)>;
};
};