// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
#include "mt7621.dtsi"
led-failsafe = &led_sys;
led-running = &led_sys;
led-upgrade = &led_sys;
- };
-
- chosen {
- bootargs = "console=ttyS0,57600";
+ label-mac-device = &gmac0;
};
leds {
compatible = "gpio-leds";
led_sys: sys {
- label = "g7:blue:sys";
- gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ label = "blue:sys";
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
};
};
reset {
label = "reset";
- gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
linux,code = <KEY_RESTART>;
};
};
factory: partition@40000 {
+ compatible = "nvmem-cells";
label = "factory";
reg = <0x40000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
read-only;
+
+ eeprom_factory_0: eeprom@0 {
+ reg = <0x0 0x4da8>;
+ };
+
+ eeprom_factory_8000: eeprom@8000 {
+ reg = <0x8000 0x4da8>;
+ };
+
+ macaddr_factory_e00c: macaddr@e00c {
+ reg = <0xe00c 0x6>;
+ };
};
partition@50000 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x0000>;
+ nvmem-cells = <&eeprom_factory_0>;
+ nvmem-cell-names = "eeprom";
ieee80211-freq-limit = <2400000 2500000>;
};
};
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
+ nvmem-cells = <&eeprom_factory_8000>;
+ nvmem-cell-names = "eeprom";
ieee80211-freq-limit = <5000000 6000000>;
};
};
-ðernet {
- mtd-mac-address = <&factory 0xe00c>;
+&gmac0 {
+ nvmem-cells = <&macaddr_factory_e00c>;
+ nvmem-cell-names = "mac-address";
};
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "wdt";
- ralink,function = "gpio";
+&gmac1 {
+ status = "okay";
+ label = "wan";
+ phy-handle = <ðphy4>;
+
+ nvmem-cells = <&macaddr_factory_e00c>;
+ nvmem-cell-names = "mac-address";
+ mac-address-increment = <1>;
+};
+
+&mdio {
+ ethphy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+&switch0 {
+ ports {
+ port@0 {
+ status = "okay";
+ label = "lan1";
+ };
+
+ port@1 {
+ status = "okay";
+ label = "lan2";
+ };
+
+ port@2 {
+ status = "okay";
+ label = "lan3";
};
+
+ port@3 {
+ status = "okay";
+ label = "lan4";
+ };
+ };
+};
+
+&state_default {
+ gpio {
+ groups = "i2c", "uart3", "wdt";
+ function = "gpio";
};
};