#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "asus,rt-n56u-b1", "mediatek,mt7621-soc";
model = "ASUS RT-N56U B1";
aliases {
- label-mac-device = &wan;
+ label-mac-device = &gmac1;
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
compatible = "gpio-leds";
led_power: power {
- label = "blue:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
};
wan {
- label = "blue:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
};
lan {
- label = "blue:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
usb {
- label = "blue:usb";
+ function = LED_FUNCTION_USB;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
trigger-sources = <&xhci_ehci_port1>, <&ehci_port2>;
linux,default-trigger = "usbport";
read-only;
};
- factory: partition@40000 {
+ partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eeprom_factory_0: eeprom@0 {
+ reg = <0x0 0x400>;
+ };
+
+ eeprom_factory_8000: eeprom@8000 {
+ reg = <0x8000 0x200>;
+ };
+
+ macaddr_factory_4: macaddr@4 {
+ reg = <0x4 0x6>;
+ };
+
+ macaddr_factory_8004: macaddr@8004 {
+ reg = <0x8004 0x6>;
+ };
+ };
};
partition@50000 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
+ nvmem-cells = <&eeprom_factory_8000>;
+ nvmem-cell-names = "eeprom";
};
};
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x0000>;
+ nvmem-cells = <&eeprom_factory_0>;
+ nvmem-cell-names = "eeprom";
};
};
&gmac0 {
- mtd-mac-address = <&factory 0x8004>;
+ nvmem-cells = <&macaddr_factory_8004>;
+ nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+ status = "okay";
+ label = "wan";
+ phy-handle = <ðphy4>;
+
+ nvmem-cells = <&macaddr_factory_4>;
+ nvmem-cell-names = "mac-address";
+};
+
+&mdio {
+ ethphy4: ethernet-phy@4 {
+ reg = <4>;
+ };
};
&switch0 {
status = "okay";
label = "lan1";
};
-
- wan: port@4 {
- status = "okay";
- label = "wan";
- mtd-mac-address = <&factory 0x4>;
- };
};
};