ramips: convert to new LED color/function format where possible
[openwrt/staging/jow.git] / target / linux / ramips / dts / mt7621_buffalo_wsr-2533dhpl.dts
index 789edca6dfa87e4f1bb1126ad29599d7549ecb89..10decdfe82fa16b9771a2ab29a0383e303ae768e 100644 (file)
@@ -4,6 +4,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 
 / {
        compatible = "buffalo,wsr-2533dhpl", "mediatek,mt7621-soc";
@@ -46,7 +47,8 @@
                };
 
                led_power: power {
-                       label = "green:power";
+                       function = LED_FUNCTION_POWER;
+                       color = <LED_COLOR_ID_GREEN>;
                        gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
                };
 
                                label = "factory";
                                reg = <0x40000 0x10000>;
                                read-only;
+
+                               nvmem-layout {
+                                       compatible = "fixed-layout";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       eeprom_factory_0: eeprom@0 {
+                                               reg = <0x0 0x4da8>;
+                                       };
+
+                                       eeprom_factory_8000: eeprom@8000 {
+                                               reg = <0x8000 0x4da8>;
+                                       };
+
+                                       macaddr_factory_4: macaddr@4 {
+                                               compatible = "mac-base";
+                                               reg = <0x4 0x6>;
+                                               #nvmem-cell-cells = <1>;
+                                       };
+                               };
                        };
 
                        partition@50000 {
 };
 
 &gmac0 {
-       nvmem-cells = <&macaddr_factory_4>;
+       nvmem-cells = <&macaddr_factory_4 (-1)>;
        nvmem-cell-names = "mac-address";
-       mac-address-increment = <(-1)>;
+};
+
+&gmac1 {
+       status = "okay";
+       label = "wan";
+       phy-handle = <&ethphy0>;
+
+       nvmem-cells = <&macaddr_factory_4 (-1)>;
+       nvmem-cell-names = "mac-address";
+};
+
+&mdio {
+       ethphy0: ethernet-phy@0 {
+               reg = <0>;
+       };
 };
 
 &switch0 {
        ports {
-               port@0 {
-                       status = "okay";
-                       label = "wan";
-               };
-
                port@1 {
                        status = "okay";
                        label = "lan4";
        wifi@0,0 {
                compatible = "mediatek,mt76";
                reg = <0x0000 0 0 0 0>;
-               mediatek,mtd-eeprom = <&factory 0x0000>;
+               nvmem-cells = <&eeprom_factory_0>;
+               nvmem-cell-names = "eeprom";
                ieee80211-freq-limit = <2400000 2500000>;
        };
 };
        wifi@0,0 {
                compatible = "mediatek,mt76";
                reg = <0x0000 0 0 0 0>;
-               mediatek,mtd-eeprom = <&factory 0x8000>;
+               nvmem-cells = <&eeprom_factory_8000>;
+               nvmem-cell-names = "eeprom";
                ieee80211-freq-limit = <5000000 6000000>;
        };
 };
 &xhci {
        status = "disabled";
 };
-
-&factory {
-       compatible = "nvmem-cells";
-       #address-cells = <1>;
-       #size-cells = <1>;
-
-       macaddr_factory_4: macaddr@4 {
-               reg = <0x4 0x6>;
-       };
-};