#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "buffalo,wsr-2533dhpl", "mediatek,mt7621-soc";
};
led_power: power {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
};
label = "factory";
reg = <0x40000 0x10000>;
read-only;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eeprom_factory_0: eeprom@0 {
+ reg = <0x0 0x4da8>;
+ };
+
+ eeprom_factory_8000: eeprom@8000 {
+ reg = <0x8000 0x4da8>;
+ };
+
+ macaddr_factory_4: macaddr@4 {
+ compatible = "mac-base";
+ reg = <0x4 0x6>;
+ #nvmem-cell-cells = <1>;
+ };
+ };
};
partition@50000 {
};
&gmac0 {
- mtd-mac-address = <&factory 0x4>;
- mac-address-increment = <(-1)>;
+ nvmem-cells = <&macaddr_factory_4 (-1)>;
+ nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+ status = "okay";
+ label = "wan";
+ phy-handle = <ðphy0>;
+
+ nvmem-cells = <&macaddr_factory_4 (-1)>;
+ nvmem-cell-names = "mac-address";
+};
+
+&mdio {
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
};
&switch0 {
ports {
- port@0 {
- status = "okay";
- label = "wan";
- };
-
port@1 {
status = "okay";
label = "lan4";
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x0000>;
+ nvmem-cells = <&eeprom_factory_0>;
+ nvmem-cell-names = "eeprom";
ieee80211-freq-limit = <2400000 2500000>;
};
};
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
+ nvmem-cells = <&eeprom_factory_8000>;
+ nvmem-cell-names = "eeprom";
ieee80211-freq-limit = <5000000 6000000>;
};
};