-/dts-v1/;
-
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "buffalo,wsr-600dhp", "mediatek,mt7621-soc";
led-upgrade = &led_power;
};
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- chosen {
- bootargs = "console=ttyS0,57600";
- };
-
leds {
compatible = "gpio-leds";
led_power: power {
- label = "wsr-600:green:power";
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
wifi_o {
- label = "wsr-600:orange:wifi";
- gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ label = "orange:wifi";
+ gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
};
diag {
- label = "wsr-600:orange:diag";
- gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ label = "orange:diag";
+ gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
};
wifi_g {
- label = "wsr-600:green:wifi";
- gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ label = "green:wifi";
+ gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
};
router_o {
- label = "wsr-600:orange:router";
- gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+ label = "orange:router";
+ gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
};
router_g {
- label = "wsr-600:green:router";
- gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ label = "green:router";
+ gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
};
internet_o {
- label = "wsr-600:orange:internet";
- gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ label = "orange:internet";
+ gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
};
internet_g {
- label = "wsr-600:green:internet";
- gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+ label = "green:internet";
+ gpios = <&gpio 48 GPIO_ACTIVE_LOW>;
};
};
keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
+ compatible = "gpio-keys";
power {
label = "power";
- gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
};
reset {
label = "reset";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
aoss {
label = "aoss";
- gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
auto {
label = "mode";
- gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
};
ap {
label = "ap";
- gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
};
router {
label = "router";
- gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 10 GPIO_ACTIVE_HIGH>;
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
};
gpio_poweroff {
compatible = "gpio-poweroff";
- gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
};
};
&spi0 {
status = "okay";
- m25p80@0 {
+ flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
read-only;
};
- factory: partition@40000 {
+ partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eeprom_factory_0: eeprom@0 {
+ reg = <0x0 0x400>;
+ };
+
+ eeprom_factory_8000: eeprom@8000 {
+ reg = <0x8000 0x200>;
+ };
+
+ macaddr_factory_4: macaddr@4 {
+ reg = <0x4 0x6>;
+ };
+ };
};
partition@50000 {
};
};
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
- ralink,function = "gpio";
- };
+&state_default {
+ gpio {
+ groups = "i2c", "uart2", "uart3", "sdhci";
+ function = "gpio";
};
};
&pcie0 {
rt5592@0,0 {
reg = <0x0000 0 0 0 0>;
- ralink,mtd-eeprom = <&factory 0x8000>;
+ nvmem-cells = <&eeprom_factory_8000>;
+ nvmem-cell-names = "eeprom";
};
};
&pcie1 {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x0000>;
+ nvmem-cells = <&eeprom_factory_0>;
+ nvmem-cell-names = "eeprom";
+ };
+};
+
+&gmac0 {
+ nvmem-cells = <&macaddr_factory_4>;
+ nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+ status = "okay";
+ label = "wan";
+ phy-handle = <ðphy4>;
+
+ nvmem-cells = <&macaddr_factory_4>;
+ nvmem-cell-names = "mac-address";
+};
+
+&mdio {
+ ethphy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+&switch0 {
+ ports {
+ port@0 {
+ status = "okay";
+ label = "lan1";
+ };
+
+ port@1 {
+ status = "okay";
+ label = "lan2";
+ };
+
+ port@2 {
+ status = "okay";
+ label = "lan3";
+ };
+
+ port@3 {
+ status = "okay";
+ label = "lan4";
+ };
};
};