bootargs = "console=ttyS0,115200";
};
- palmbus: palmbus@1E000000 {
- i2c: i2c@900 {
- status = "okay";
-
- pcf8563: rtc@51 {
- status = "okay";
- compatible = "nxp,pcf8563";
- reg = <0x51>;
- };
- };
- };
-
leds {
compatible = "gpio-leds";
power {
label = "pbr-m1:blue:power";
- gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
default-state = "on";
};
led_sys: sys {
label = "pbr-m1:blue:sys";
- gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
};
internet {
label = "pbr-m1:blue:internet";
- gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
};
wlan2g {
label = "pbr-m1:blue:wlan2g";
- gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
};
wlan5g {
label = "pbr-m1:blue:wlan5g";
- gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
};
};
reset {
label = "reset";
- gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
power_usb2 {
gpio-export,name = "power_usb2";
gpio-export,output = <1>;
- gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
};
power_usb3 {
gpio-export,name = "power_usb3";
gpio-export,output = <1>;
- gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
};
power_sata {
gpio-export,name = "power_sata";
gpio-export,output = <1>;
- gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
};
};
beeper: beeper {
compatible = "gpio-beeper";
- gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&i2c {
+ status = "okay";
+
+ rtc@51 {
+ status = "okay";
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
};
};
&spi0 {
status = "okay";
- m25p80@0 {
+ flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
+ broken-flash-reset;
partitions {
compatible = "fixed-partitions";
};
};
+&pinctrl {
+ uart3_gpio: uart3-gpio {
+ uart3 {
+ groups = "uart3";
+ function = "gpio";
+ };
+ };
+};
+
&pcie {
status = "okay";
+ pinctrl-0 = <&pcie_pins>, <&uart3_gpio>;
+ reset-gpios = <&gpio 19 GPIO_ACTIVE_LOW>,
+ <&gpio 7 GPIO_ACTIVE_LOW>;
};
&pcie0 {
};
};
-ðernet {
+&gmac0 {
mtd-mac-address = <&factory 0xe000>;
};
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "wdt", "rgmii2", "jtag", "mdio";
- ralink,function = "gpio";
+&switch0 {
+ ports {
+ port@0 {
+ status = "okay";
+ label = "lan1";
+ };
+
+ port@1 {
+ status = "okay";
+ label = "lan2";
+ };
+
+ port@2 {
+ status = "okay";
+ label = "lan3";
+ };
+
+ port@3 {
+ status = "okay";
+ label = "lan4";
+ };
+
+ port@4 {
+ status = "okay";
+ label = "wan";
+ mtd-mac-address = <&factory 0xe006>;
};
};
};
+
+&state_default {
+ gpio {
+ groups = "wdt", "rgmii2", "jtag";
+ function = "gpio";
+ };
+};