// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "gehua,ghl-r-001", "mediatek,mt7621-soc";
model = "GeHua GHL-R-001";
- chosen {
- bootargs = "console=ttyS0,57600";
- };
-
leds {
compatible = "gpio-leds";
internet {
- label = "ghl-r-001:blue:internet";
- gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+ label = "blue:internet";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
usb {
- label = "ghl-r-001:blue:usb";
- gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+ function = LED_FUNCTION_USB;
+ color = <LED_COLOR_ID_BLUE>;
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
trigger-sources = <&xhci_ehci_port1>, <&ehci_port2>;
linux,default-trigger = "usbport";
};
reset {
label = "reset";
- gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
status = "okay";
flash@0 {
- compatible = "mx25l25635f", "jedec,spi-nor";
+ compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
+ broken-flash-reset;
m25p,fast-read;
partitions {
read-only;
};
- factory: partition@40000 {
+ partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eeprom_factory_0: eeprom@0 {
+ reg = <0x0 0x400>;
+ };
+
+ eeprom_factory_8000: eeprom@8000 {
+ reg = <0x8000 0x200>;
+ };
+
+ macaddr_factory_e000: macaddr@e000 {
+ compatible = "mac-base";
+ reg = <0xe000 0x6>;
+ #nvmem-cell-cells = <1>;
+ };
+ };
};
partition@50000 {
&pcie0 {
wifi@0,0 {
reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x0000>;
+ nvmem-cells = <&eeprom_factory_0>;
+ nvmem-cell-names = "eeprom";
};
};
&pcie1 {
wifi@0,0 {
reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
+ nvmem-cells = <&eeprom_factory_8000>;
+ nvmem-cell-names = "eeprom";
ieee80211-freq-limit = <5000000 6000000>;
led {
};
};
-ðernet {
- mtd-mac-address = <&factory 0xe000>;
+&gmac0 {
+ nvmem-cells = <&macaddr_factory_e000 0>;
+ nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+ status = "okay";
+ label = "wan";
+ phy-handle = <ðphy4>;
+
+ nvmem-cells = <&macaddr_factory_e000 1>;
+ nvmem-cell-names = "mac-address";
+};
+
+&mdio {
+ ethphy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+&switch0 {
+ ports {
+ port@0 {
+ status = "okay";
+ label = "lan1";
+ };
+
+ port@1 {
+ status = "okay";
+ label = "lan2";
+ };
+
+ port@2 {
+ status = "okay";
+ label = "lan3";
+ };
+ };
};
&state_default {
gpio {
- ralink,group = "jtag", "wdt";
- ralink,function = "gpio";
+ groups = "jtag", "wdt";
+ function = "gpio";
};
};