#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "xiaomi,mi-router-3-pro", "mediatek,mt7621-soc";
leds {
compatible = "gpio-leds";
- led_status_red: status_red {
- label = "red:status";
+ led_status_red: led-0 {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_STATUS;
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
};
- led_status_blue: status_blue {
- label = "blue:status";
+ led_status_blue: led-1 {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_STATUS;
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
};
- led_status_yellow: status_yellow {
- label = "yellow:status";
+ led_status_yellow: led-2 {
+ color = <LED_COLOR_ID_YELLOW>;
+ function = LED_FUNCTION_STATUS;
gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
};
- wan_amber {
- label = "amber:wan";
+ led-3 {
+ color = <LED_COLOR_ID_AMBER>;
+ function = LED_FUNCTION_WAN;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "dsa-0.0:04:1Gbps";
+ linux,default-trigger = "mt7530-0:04:1Gbps";
};
- lan3_amber {
- label = "amber:lan3";
+ led-4 {
+ color = <LED_COLOR_ID_AMBER>;
+ function = LED_FUNCTION_LAN;
+ function-enumerator = <3>;
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "dsa-0.0:03:1Gbps";
+ linux,default-trigger = "mt7530-0:03:1Gbps";
};
- lan2_amber {
- label = "amber:lan2";
+ led-5 {
+ color = <LED_COLOR_ID_AMBER>;
+ function = LED_FUNCTION_LAN;
+ function-enumerator = <2>;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "dsa-0.0:02:1Gbps";
+ linux,default-trigger = "mt7530-0:02:1Gbps";
};
- lan1_amber {
- label = "amber:lan1";
+ led-6 {
+ color = <LED_COLOR_ID_AMBER>;
+ function = LED_FUNCTION_LAN;
+ function-enumerator = <1>;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "dsa-0.0:01:1Gbps";
+ linux,default-trigger = "mt7530-0:01:1Gbps";
};
};
read-only;
};
- factory: partition@c0000 {
+ partition@c0000 {
label = "factory";
reg = <0x0c0000 0x40000>;
read-only;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eeprom_factory_0: eeprom@0 {
+ reg = <0x0 0x4da8>;
+ };
+
+ eeprom_factory_8000: eeprom@8000 {
+ reg = <0x8000 0x4da8>;
+ };
+
+ macaddr_factory_e000: macaddr@e000 {
+ reg = <0xe000 0x6>;
+ };
+
+ macaddr_factory_e006: macaddr@e006 {
+ reg = <0xe006 0x6>;
+ };
+ };
};
partition@100000 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x0000>;
+ nvmem-cells = <&eeprom_factory_0>;
+ nvmem-cell-names = "eeprom";
ieee80211-freq-limit = <2400000 2500000>;
};
};
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
+ nvmem-cells = <&eeprom_factory_8000>;
+ nvmem-cell-names = "eeprom";
ieee80211-freq-limit = <5000000 6000000>;
};
};
&gmac0 {
- mtd-mac-address = <&factory 0xe006>;
+ nvmem-cells = <&macaddr_factory_e006>;
+ nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+ status = "okay";
+ label = "wan";
+ phy-handle = <ðphy4>;
+
+ nvmem-cells = <&macaddr_factory_e000>;
+ nvmem-cell-names = "mac-address";
+};
+
+&mdio {
+ ethphy4: ethernet-phy@4 {
+ reg = <4>;
+ };
};
&switch0 {
status = "okay";
label = "lan1";
};
-
- port@4 {
- status = "okay";
- label = "wan";
- mtd-mac-address = <&factory 0xe000>;
- };
};
};