ramips: clean up useless dts partition labels

[openwrt/staging/jow.git] / target / linux / ramips / dts / mt7621_zbtlink_zbt-we3526.dts

diff --git a/target/linux/ramips/dts/mt7621_zbtlink_zbt-we3526.dts b/target/linux/ramips/dts/mt7621_zbtlink_zbt-we3526.dts
index b1d3e4e81252f00aae93fd4cd4466275c70ba7e7..dfa49a2bc5f6bf9f792a283ebfc972cb33257b30 100644 (file)
--- a/target/linux/ramips/dts/mt7621_zbtlink_zbt-we3526.dts
+++ b/target/linux/ramips/dts/mt7621_zbtlink_zbt-we3526.dts
@@ -1,5 +1,3 @@
-/dts-v1/;
-
 #include "mt7621.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
@@ -13,24 +11,21 @@
                bootargs = "console=ttyS0,115200";
        };
 
-       palmbus: palmbus@1E000000 {
-               i2c@900 {
-                       status = "okay";
-               };
-       };
-
        keys {
-               compatible = "gpio-keys-polled";
-               poll-interval = <20>;
+               compatible = "gpio-keys";
 
                reset {
                        label = "reset";
-                       gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+                       gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_RESTART>;
                };
        };
 };
 
+&i2c {
+       status = "okay";
+};
+
 &sdhci {
        status = "okay";
 };
@@ -38,7 +33,7 @@
 &spi0 {
        status = "okay";
 
-       m25p80@0 {
+       flash@0 {
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <10000000>;
@@ -60,13 +55,35 @@
                                read-only;
                        };
 
-                       factory: partition@40000 {
+                       partition@40000 {
                                label = "factory";
                                reg = <0x40000 0x10000>;
                                read-only;
+
+                               nvmem-layout {
+                                       compatible = "fixed-layout";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       eeprom_factory_0: eeprom@0 {
+                                               reg = <0x0 0x400>;
+                                       };
+
+                                       eeprom_factory_8000: eeprom@8000 {
+                                               reg = <0x8000 0x200>;
+                                       };
+
+                                       macaddr_factory_e000: macaddr@e000 {
+                                               reg = <0xe000 0x6>;
+                                       };
+
+                                       macaddr_factory_e006: macaddr@e006 {
+                                               reg = <0xe006 0x6>;
+                                       };
+                               };
                        };
 
-                       firmware: partition@50000 {
+                       partition@50000 {
                                compatible = "denx,uimage";
                                label = "firmware";
                                reg = <0x50000 0xfb0000>;
@@ -83,7 +100,8 @@
        wifi@0,0 {
                compatible = "pci14c3,7662";
                reg = <0x0000 0 0 0 0>;
-               mediatek,mtd-eeprom = <&factory 0x8000>;
+               nvmem-cells = <&eeprom_factory_8000>;
+               nvmem-cell-names = "eeprom";
                ieee80211-freq-limit = <5000000 6000000>;
 
                led {
@@ -96,19 +114,58 @@
        wifi@0,0 {
                compatible = "pci14c3,7603";
                reg = <0x0000 0 0 0 0>;
-               mediatek,mtd-eeprom = <&factory 0x0000>;
+               nvmem-cells = <&eeprom_factory_0>;
+               nvmem-cell-names = "eeprom";
        };
 };
 
-&ethernet {
-       mtd-mac-address = <&factory 0xe000>;
+&gmac0 {
+       nvmem-cells = <&macaddr_factory_e000>;
+       nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+       status = "okay";
+       label = "wan";
+       phy-handle = <&ethphy4>;
+
+       nvmem-cells = <&macaddr_factory_e006>;
+       nvmem-cell-names = "mac-address";
 };
 
-&pinctrl {
-       state_default: pinctrl0 {
-               gpio {
-                       ralink,group = "wdt";
-                       ralink,function = "gpio";
+&mdio {
+       ethphy4: ethernet-phy@4 {
+               reg = <4>;
+       };
+};
+
+&switch0 {
+       ports {
+               port@0 {
+                       status = "okay";
+                       label = "lan1";
+               };
+
+               port@1 {
+                       status = "okay";
+                       label = "lan2";
+               };
+
+               port@2 {
+                       status = "okay";
+                       label = "lan3";
+               };
+
+               port@3 {
+                       status = "okay";
+                       label = "lan4";
                };
        };
 };
+
+&state_default {
+       gpio {
+               groups = "wdt";
+               function = "gpio";
+       };
+};